Direct Current Motor
ZAP18FAAND200S
(NSN) National Stock Number
6105-00-260-6682
Federal Supply Classification
6105 Electrical Motors
Item Name Code
16350
Schedule B Code
-
Summary
2.062 inches overall height, 5.002 inches overall length, 1.562 inches overall width, 0.1870 inches nominal single end shaft diameter, clockwise single end or counterclockwise single end shaft rotation direction, intermittent duty cycle
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | CX |
Identification
A motor which is designed for operation from a direct current source. Excludes:motor, engine starter, electrical. See also motor, control.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 16350 | A271A0 | 1 | 1 |
Specifications
Overall Height
2.062 inches
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Length
5.002 inches
Details
A measurement of the longest dimension of an item,in distinction from width.Overall Width
1.562 inches
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Shaft Diameter
0.1870 inches nominal single end
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Rotation Direction
clockwise single end or counterclockwise single end
Details
The direction of rotation of a rotating shaft as viewed from the drive end.Duty Cycle
intermittent
Details
The working period under which the item was designed to operate.Enclosure Feature
totally inclosed
Details
An indication of the feature/s/ of the enclosure.Winding Type
series wound
Details
Indicates the specific arrangement in which wire is wound on a form or is formed by winding.Mounting Method
pad
Details
The means of attaching the item.Mounting Facility Type And Quantity
4 unthreaded hole
Details
Indicates the type and number of facilities by which the item is mounted.Time Interval
3.0 minutes maximum on and 17.0 minutes minimum off
Details
The acceptable time limits for the item.Cooling Method
nonventilated
Details
The means of cooling used to maintain the required operating temperature of the item.Current Rating Method
load
Details
The means by which the current is rated.Inclosure Specification
commercial
Details
The government or industrial specification or standard that defines the inclosure feature.Features Provided
horizontal mounting position and vertical mounting position
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Power Rating
0.0333 horsepower output
Details
The amount of electrical energy that can be dissipated.Length Of Shaft From Housing
0.250 inches single end
Details
A measurement of the longest dimension of the shaft projection of an item,in distinction from width.Temp Rating
-50.0 operating deg celsius and 70.0 operating deg celsius
Details
The temperature at which the item is designed to operate.Rotor Speed Rating In Rpm
20000.0 single full load
Details
The speed rating of a rotor,expressed in revolutions per minute.Nominal Center To Center Distance Between Mounting Facilities Parallel To Width
1.250 inches
Details
The nominal center to center distance between the mounting facilities parallel to the width.Nominal Center To Center Distance Between Mounting Facilities Parallel To Height
1.250 inches
Details
The nominal center to center distance between the mounting facilities parallel to the height.Current Rating In Amps
3.000 single input
Details
The amount of current for which an item is rated,expressed in amperes.Connection Type And Voltage Rating In Volts
24.0 line to neutral single input
Details
Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.Shaft End Characteristic
a23 single style single end
Details
An indication of the characteristic(s) of the shaft end.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 26477-02 | 35351 | 5 | - | 5 | 9 | - | CX |
| 26477-03 | 35351 | X | - | 5 | 2 | - | XX |
| A100A4 | 35351 | 5 | - | 5 | 9 | - | CX |
| A100A4 | 3CPE0 | 5 | - | C | 1 | - | ZZ |
| A100A4 | 31435 | 5 | - | 3 | 9 | - | CX |
| MILM8609 | 81349 | X | - | 5 | 1 | - | XX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34760 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 658 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 6105-00-260-6682
What is the NIIN of the NSN 6105-00-260-6682?
The National Item Identification Number (NIIN) of the NSN 6105-00-260-6682 is 00-260-6682
When the NSN 6105-00-260-6682 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 6105-00-260-6682 contain any precious metals?
Does not contain precious metal
Does the NSN 6105-00-260-6682 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products