Control Motor

M01075

(NSN) National Stock Number

6105-00-349-6896

Federal Supply Classification

6105 Electrical Motors

Item Name Code

19258

Schedule B Code

8412809000

Summary

2.875 inches overall height, 4.562 inches overall length, 2.375 inches overall width, 0.120 inches nominal first end thread length, 0.179 inches minimum first end and 0.189 inches maximum first end taper length, 0.075 inches nominal first end undercut diameter

DAC	HCC	DMIL	RNCC
5	-	-	5

RNVC	SADC	MSDS	RNAAC
9	-	-	CX

Identification

A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also servomotor, automatic pilot.

INC	FIIG	Concept	Condition
19258	A271A0	1	1

Specifications

Overall Height

2.875 inches

Details

The distance measured in a straight line from the bottom to the top of an item.

Overall Length

4.562 inches

Details

A measurement of the longest dimension of an item,in distinction from width.

Overall Width

2.375 inches

Details

An overall measurement taken at right angles to the length of an item,in distinction from thickness.

Thread Length

0.120 inches nominal first end

Details

A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

Taper Length

0.179 inches minimum first end and 0.189 inches maximum first end

Details

A measurement of the longest dimension of the tapered portion of an item,in distinction from width.

Undercut Diameter

0.075 inches nominal first end

Details

None.

Shaft Diameter

0.112 inches nominal first end

Details

The length of a straight line which passes through the center of a shaft,and terminates at the circumference.

Shaft Diameter

0.156 inches nominal second end

Details

The length of a straight line which passes through the center of a shaft,and terminates at the circumference.

Flatted Portion Length

0.7500 inches nominal second end

Details

None.

Current Type

ac input

Details

Indicates the type of current whether alternating,direct,or both.

Undercut Length

0.030 inches nominal first end

Details

None.

Flat Depth

0.016 inches minimum second end and 0.017 inches maximum second end

Details

None.

Enclosure Feature

totally inclosed

Details

An indication of the feature/s/ of the enclosure.

Mounting Method

pad

Details

The means of attaching the item.

Mounting Facility Type And Quantity

4 unthreaded hole

Details

Indicates the type and number of facilities by which the item is mounted.

Cooling Method

natural convection ventilated

Details

The means of cooling used to maintain the required operating temperature of the item.

Control Field Impedance Rating In Ohms

4900.0 and 5100.0

Details

The impedance rating of the control field,expressed in ohms.

Control Field Winding Type

single winding w/center tap

Details

Indicates the type of winding(s) of the control field.

Undercut Center To Shaft End Distance

0.130 inches minimum and 0.140 inches maximum first end

Details

None.

Torque Rating And Type

5.0 inch-ounces stalled

Details

Indicates the torque rating,and its type.

Inclosure Specification

commercial

Details

The government or industrial specification or standard that defines the inclosure feature.

Control Field Voltage Type And Rating In Volts

300.0 ac

Details

Indicates the type of control field voltage and its rating,expressed in volts.

Features Provided

horizontal mounting position and vertical mounting position

Details

Those features,not otherwise specified,which may be required for proper functioning of the item.

Nominal Thread Size

0.112 inches first end

Details

A designation that is used for the purpose of general identification of the thread.

Taper

8.000 per foot in inches first end

Details

The amount of taper measured parallel to the longitudinal axis of the item per specific measurement scale.

Length Of Shaft From Housing

0.375 inches first end

Details

A measurement of the longest dimension of the shaft projection of an item,in distinction from width.

Length Of Shaft From Housing

1.062 inches second end

Details

A measurement of the longest dimension of the shaft projection of an item,in distinction from width.

Temp Rating

-29.0 ambient deg celsius and 65.0 ambient deg celsius

Details

The temperature at which the item is designed to operate.

Rotor Speed Rating In Rpm

3300.0 single no load

Details

The speed rating of a rotor,expressed in revolutions per minute.

Nominal Center To Center Distance Between Mounting Facilities Parallel To Width

1.920 inches

Details

The nominal center to center distance between the mounting facilities parallel to the width.

Nominal Center To Center Distance Between Mounting Facilities Parallel To Height

1.500 inches

Details

The nominal center to center distance between the mounting facilities parallel to the height.

Connection Type And Voltage Rating In Volts

115.0 line to neutral single input

Details

Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.

Shaft End Characteristic

a2 first style and a4 second style and a28 third style first end

Details

An indication of the characteristic(s) of the shaft end.

Shaft End Characteristic

a5 single style second end

Details

An indication of the characteristic(s) of the shaft end.

Phase

two input

Details

The number of alternating current phases.

Special Features

shaft end second style 0.157 in. dia; shaft end third style 0.112 in. dia

Details

Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.

Frequency In Hertz

60.0 input

Details

The cycles per second /hertz/ of the alternating current.

Thread Series Designator

unf first end

Details

A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

Terminal Type And Quantity

5 screw

Details

Indicates the type and number of terminals for providing electrical connection.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
DPJJD764-38	73693	1	-	5	2	-	CX
127N101	59440	5	-	5	9	-	48
FPE25-251-1	05088	5	-	3	2	-	ZZ
FPE25-103-1	88818	5	-	5	9	-	TU
FPE25-152-1	88818	1	-	5	9	-	CX
FPE25-251-1	88818	5	-	3	9	-	CX
FPE25-49-1	88818	5	-	5	9	-	CX
SSFPE25-103-1	88818	5	-	5	9	-	TU
SSFPE25-251-1	88818	5	-	5	9	-	CX
M01075REVH	80249	1	-	5	9	-	SE
20-52	67245	A	-	3	2	-	CX
11993	02598	1	-	5	9	-	CX
2906-1002P1	49956	4	-	C	1	-	48

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	A	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34760	-	W	-

RVC	WCC	TCC	SHC
-	593	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.

CAGE: 80249

GREENLAWN , NY , 11740-1609

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 6105-00-349-6896

What is the NIIN of the NSN 6105-00-349-6896?

The National Item Identification Number (NIIN) of the NSN 6105-00-349-6896 is 00-349-6896

When the NSN 6105-00-349-6896 was assigned to the Federal Catalog?

It was assigned 61 years ago, on Tue, Jan 1, 1963

Does the NSN 6105-00-349-6896 contain any precious metals?

Does not contain precious metal

Does the NSN 6105-00-349-6896 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.