Control Motor
U212403
(NSN) National Stock Number
6105-00-403-7082
Federal Supply Classification
6105 Electrical Motors
Item Name Code
19258
Schedule B Code
8412809000
Summary
2.580 inches overall length, 1.437 inches overall width, 0.157 inches nominal first end shaft diameter, 0.180 inches nominal second end shaft diameter, ac input current type, 15 second end teeth quantity
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | CX |
Identification
A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also servomotor, automatic pilot.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 19258 | A271A0 | 1 | 1 |
Specifications
Overall Length
2.580 inches
Details
A measurement of the longest dimension of an item,in distinction from width.Overall Width
1.437 inches
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Shaft Diameter
0.157 inches nominal first end
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Diameter
0.180 inches nominal second end
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Current Type
ac input
Details
Indicates the type of current whether alternating,direct,or both.Teeth Quantity
15 second end
Details
The number of teeth included on the item.Enclosure Feature
totally inclosed
Details
An indication of the feature/s/ of the enclosure.Mounting Method
clamp ring
Details
The means of attaching the item.Mounting Facility Type And Quantity
1 clamp collar
Details
Indicates the type and number of facilities by which the item is mounted.Cooling Method
nonventilated
Details
The means of cooling used to maintain the required operating temperature of the item.Control Field Impedance Rating In Ohms
212.0
Details
The impedance rating of the control field,expressed in ohms.Control Field Winding Type
single winding w/center tap
Details
Indicates the type of winding(s) of the control field.Full Tooth Length
0.250 inches nominal second end
Details
None.Torque Rating And Type
2.0 inch-ounces stalled
Details
Indicates the torque rating,and its type.Inclosure Specification
commercial
Details
The government or industrial specification or standard that defines the inclosure feature.Control Field Voltage Type And Rating In Volts
36.0 ac
Details
Indicates the type of control field voltage and its rating,expressed in volts.Features Provided
horizontal mounting position
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Length Of Shaft From Housing
0.440 inches first end
Details
A measurement of the longest dimension of the shaft projection of an item,in distinction from width.Length Of Shaft From Housing
0.440 inches second end
Details
A measurement of the longest dimension of the shaft projection of an item,in distinction from width.Rotor Speed Rating In Rpm
3200.0 single no load
Details
The speed rating of a rotor,expressed in revolutions per minute.Connection Type And Voltage Rating In Volts
115.0 line to neutral single input
Details
Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.Shaft End Characteristic
a1 single style first end
Details
An indication of the characteristic(s) of the shaft end.Shaft End Characteristic
a17 single style second end
Details
An indication of the characteristic(s) of the shaft end.Phase
two input
Details
The number of alternating current phases.Frequency In Hertz
60.0 input
Details
The cycles per second /hertz/ of the alternating current.Terminal Type And Quantity
5 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34760 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
TRANSICOIL LLC DBA ADS TRANSICOIL DIV TRANSICOIL
CAGE: 82686
COLLEGEVILLE
, PA
, 19426-2042
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 6105-00-403-7082
What is the NIIN of the NSN 6105-00-403-7082?
The National Item Identification Number (NIIN) of the NSN 6105-00-403-7082 is 00-403-7082
When the NSN 6105-00-403-7082 was assigned to the Federal Catalog?
It was assigned 55 years ago, on Fri, Jul 25, 1969
Does the NSN 6105-00-403-7082 contain any precious metals?
Does not contain precious metal
Does the NSN 6105-00-403-7082 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.