Direct Current Motor

230-0257-00

(NSN) National Stock Number

6105-00-578-7304

Federal Supply Classification

6105 Electrical Motors

Item Name Code

16350

Schedule B Code

Summary

0.875 inches overall height, 1.750 inches overall length, 0.875 inches overall width, 0.250 inches nominal single end shaft diameter, 16 single end teeth quantity, 70000.0 feet maximum operating altitude rating

DAC	HCC	DMIL	RNCC
A	-	-	5

RNVC	SADC	MSDS	RNAAC
9	-	-	CX

Identification

A motor which is designed for operation from a direct current source. Excludes:motor, engine starter, electrical. See also motor, control.

INC	FIIG	Concept	Condition
16350	A271A0	1	1

Specifications

Overall Height

0.875 inches

Details

The distance measured in a straight line from the bottom to the top of an item.

Overall Length

1.750 inches

Details

A measurement of the longest dimension of an item,in distinction from width.

Overall Width

0.875 inches

Details

An overall measurement taken at right angles to the length of an item,in distinction from thickness.

Shaft Diameter

0.250 inches nominal single end

Details

The length of a straight line which passes through the center of a shaft,and terminates at the circumference.

Teeth Quantity

16 single end

Details

The number of teeth included on the item.

Maximum Operating Altitude Rating

70000.0 feet

Details

The maximum altitude at which the item is rated to function.

Shaft Rotation Direction

clockwise single end

Details

The direction of rotation of a rotating shaft as viewed from the drive end.

Duty Cycle

intermittent

Details

The working period under which the item was designed to operate.

Enclosure Feature

totally inclosed

Details

An indication of the feature/s/ of the enclosure.

Winding Type

permanent magnet

Details

Indicates the specific arrangement in which wire is wound on a form or is formed by winding.

Mounting Method

face

Details

The means of attaching the item.

Mounting Facility Type And Quantity

2 threaded hole

Details

Indicates the type and number of facilities by which the item is mounted.

Time Interval

2.0 minutes maximum on and 3.0 minutes minimum off

Details

The acceptable time limits for the item.

Cooling Method

nonventilated

Details

The means of cooling used to maintain the required operating temperature of the item.

Torque Rating And Type

0.2 inch-ounces stalled

Details

Indicates the torque rating,and its type.

Inclosure Specification

commercial

Details

The government or industrial specification or standard that defines the inclosure feature.

Features Provided

frame electrically grounded and horizontal mounting position and vertical mounting position

Details

Those features,not otherwise specified,which may be required for proper functioning of the item.

Length Of Shaft From Housing

0.375 inches single end

Details

A measurement of the longest dimension of the shaft projection of an item,in distinction from width.

Temp Rating

-55.0 operating deg celsius and 72.0 operating deg celsius

Details

The temperature at which the item is designed to operate.

Mounting Facility Circle Diameter

0.660 inches

Details

The length of a straight line which passes through the center of a mounting facility circle,and terminates at the circumference.

Rotor Speed Rating In Rpm

6000.0 single full load

Details

The speed rating of a rotor,expressed in revolutions per minute.

Current Rating In Amps

0.200 single input

Details

The amount of current for which an item is rated,expressed in amperes.

Connection Type And Voltage Rating In Volts

27.5 line to neutral single input

Details

Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.

Shaft End Characteristic

a23 single style single end

Details

An indication of the characteristic(s) of the shaft end.

Terminal Type And Quantity

2 wire lead

Details

Indicates the type and number of terminals for providing electrical connection.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
41A144	25140	5	-	3	2	-	CX
230-0257-00	95105	5	-	3	2	-	CX
DC-09014	54572	A	-	3	2	-	CX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	A	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34760	-	W	-

RVC	WCC	TCC	SHC
-	593	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

ROCKWELL COLLINS, INC. DBA COLLINS AEROSPACE GOVERNMENT SYSTEMS DIV COLLINS AEROSPACE - GOVERNMENT SYSTEMS

CAGE: 13499

CEDAR RAPIDS , IA , 52498-0505

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 6105-00-578-7304

What is the NIIN of the NSN 6105-00-578-7304?

The National Item Identification Number (NIIN) of the NSN 6105-00-578-7304 is 00-578-7304

When the NSN 6105-00-578-7304 was assigned to the Federal Catalog?

It was assigned 61 years ago, on Tue, Jan 1, 1963

Does the NSN 6105-00-578-7304 contain any precious metals?

Does not contain precious metal

Does the NSN 6105-00-578-7304 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.