Motor-Tachometer Generator

11TGSM387

(NSN) National Stock Number

6105-00-626-6176

Federal Supply Classification

6105 Electrical Motors

Item Name Code

28454

Schedule B Code

8412809000

Summary

1.062 inches overall height, 3.052 inches overall length, 1.062 inches overall width, 0.104 inches nominal single end spline minor diameter, 12 single end spline quantity, 0.124 inches nominal single end shaft diameter

DAC	HCC	DMIL	RNCC
5	-	-	5

RNVC	SADC	MSDS	RNAAC
2	-	-	CX

Identification

An item which is an electrical rotating machine combining both control motor and tachometer generator action. The control motor and tachometer generator may be contained in the same or separate housings. It is designed for servo application where instant response to input signal is essential. It is generally used in circuits where the output potential from the tachometer generator is fed back to prevent excessive oscillation and for assuring high stability in a servo loop. Excludes:dynamotor; and motor-generator.

INC	FIIG	Concept	Condition
28454	A271A0	-	1

Specifications

Overall Height

1.062 inches

Details

The distance measured in a straight line from the bottom to the top of an item.

Overall Length

3.052 inches

Details

A measurement of the longest dimension of an item,in distinction from width.

Overall Width

1.062 inches

Details

An overall measurement taken at right angles to the length of an item,in distinction from thickness.

Spline Minor Diameter

0.104 inches nominal single end

Details

The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.

Spline Quantity

12 single end

Details

The number of splines on or in the item.

Shaft Diameter

0.124 inches nominal single end

Details

The length of a straight line which passes through the center of a shaft,and terminates at the circumference.

Current Type

ac input

Details

Indicates the type of current whether alternating,direct,or both.

Enclosure Feature

totally inclosed

Details

An indication of the feature/s/ of the enclosure.

Spline Length

0.375 inches nominal single end

Details

A measurement of the longest dimension of a spline,in distinction from width.

Mounting Method

clamp ring

Details

The means of attaching the item.

Mounting Facility Type And Quantity

1 clamp collar

Details

Indicates the type and number of facilities by which the item is mounted.

Excitor Type

separately excited

Details

Indicates the type of excitor provided.

Calibration Speed In Rpm

1000.0

Details

The speed at which the calibration is determined,expressed in revolutions per minute.

Cooling Method

nonventilated

Details

The means of cooling used to maintain the required operating temperature of the item.

Calibration Voltage Output Type In Volts

0.5 ac

Details

An indication of the type of calibration voltage output,expressed in volts.

Torque Rating And Type

0.6 inch-ounces stalled

Details

Indicates the torque rating,and its type.

Inclosure Specification

commercial

Details

The government or industrial specification or standard that defines the inclosure feature.

Control Field Voltage Type And Rating In Volts

180.0 ac

Details

Indicates the type of control field voltage and its rating,expressed in volts.

Length Of Shaft From Housing

0.376 inches single end

Details

A measurement of the longest dimension of the shaft projection of an item,in distinction from width.

Temp Rating

-55.0 ambient deg celsius and 95.0 ambient deg celsius

Details

The temperature at which the item is designed to operate.

Rotor Speed Rating In Rpm

5900.0 single no load

Details

The speed rating of a rotor,expressed in revolutions per minute.

Connection Type And Voltage Rating In Volts

115.0 line to neutral single input

Details

Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.

Shaft End Characteristic

a14 single style single end

Details

An indication of the characteristic(s) of the shaft end.

Phase

single input

Details

The number of alternating current phases.

Frequency In Hertz

400.0 input

Details

The cycles per second /hertz/ of the alternating current.

Terminal Type And Quantity

2 wire lead

Details

Indicates the type and number of terminals for providing electrical connection.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
1011-196-011	73138	5	-	3	2	-	SE
7919721	24617	X	-	5	2	-	XX
SJ1HLX7-41CC	19070	5	-	5	9	-	ZZ
R804-3B	88818	X	-	5	2	-	XX
11MA4BFC03	19134	2	-	5	9	-	KE
7919721	99974	X	-	5	9	-	XX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	A	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34760	-	W	-

RVC	WCC	TCC	SHC
-	593	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

AMETEK TECHNICAL & INDUSTRIAL PRODUCTS, INC. DBA TACHTRONIC INSTRUMENTS DIVISION DIV AMETEK TECHNICAL AND INDUSTRIAL PRODUCTS, INC.

CAGE: 14404

NEW ULM , MN , 56073-1167

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 6105-00-626-6176

What is the NIIN of the NSN 6105-00-626-6176?

The National Item Identification Number (NIIN) of the NSN 6105-00-626-6176 is 00-626-6176

When the NSN 6105-00-626-6176 was assigned to the Federal Catalog?

It was assigned 61 years ago, on Tue, Jan 1, 1963

Does the NSN 6105-00-626-6176 contain any precious metals?

Does not contain precious metal

Does the NSN 6105-00-626-6176 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.