Alternating Current Motor
SP-B5PEM1
(NSN) National Stock Number
6105-00-851-4692
Federal Supply Classification
6105 Electrical Motors
Item Name Code
00530
Schedule B Code
-
Summary
Right-hand single end thread direction, 4.000 inches overall height, 3.611 inches overall length, 3.426 inches overall width, 0.5120 inches nominal single end thread length, 0.2500 inches nominal single end shaft diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 3 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | CX |
Identification
A motor which is designed for operation from an alternating current source. See also motor, control.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00530 | A271A0 | 1 | 1 |
Specifications
Thread Direction
right-hand single end
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Overall Height
4.000 inches
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Length
3.611 inches
Details
A measurement of the longest dimension of an item,in distinction from width.Overall Width
3.426 inches
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Thread Length
0.5120 inches nominal single end
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Shaft Diameter
0.2500 inches nominal single end
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Rotation Direction
clockwise single end
Details
The direction of rotation of a rotating shaft as viewed from the drive end.Duty Cycle
continuous
Details
The working period under which the item was designed to operate.Enclosure Feature
totally inclosed
Details
An indication of the feature/s/ of the enclosure.Winding Type
induction-shaded pole
Details
Indicates the specific arrangement in which wire is wound on a form or is formed by winding.Mounting Method
fixed base
Details
The means of attaching the item.Mounting Facility Type And Quantity
12 threaded hole
Details
Indicates the type and number of facilities by which the item is mounted.Cooling Method
nonventilated
Details
The means of cooling used to maintain the required operating temperature of the item.Current Rating Method
load
Details
The means by which the current is rated.Inclosure Specification
commercial
Details
The government or industrial specification or standard that defines the inclosure feature.Shaft End Style
external threaded single end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft end.Features Provided
horizontal mounting position and vertical mounting position
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Nominal Thread Size
0.250 inches single end
Details
A designation that is used for the purpose of general identification of the thread.Length Of Shaft From Housing
0.512 inches single end
Details
A measurement of the longest dimension of the shaft projection of an item,in distinction from width.Shaft Center To Mounting Surface Distance
2.078 inches single end
Details
The distance between the center of the shaft to the mounting surface.Nominal Center To Center Distance Between Mounting Facilities Parallel To Length
0.625 inches
Details
The nominal center to center distance between the mounting facilities parallel to the length.Rotor Speed Rating In Rpm
1200.00 low full load and 1550.0 high full load
Details
The speed rating of a rotor,expressed in revolutions per minute.Nominal Center To Center Distance Between Mounting Facilities Parallel To Width
1.125 inches
Details
The nominal center to center distance between the mounting facilities parallel to the width.Current Rating In Amps
0.500 single input
Details
The amount of current for which an item is rated,expressed in amperes.Connection Type And Voltage Rating In Volts
115.0 line to neutral single input
Details
Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.Phase
single input
Details
The number of alternating current phases.Special Features
impedance protected
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Frequency In Hertz
50.0 or 60.0 input
Details
The cycles per second /hertz/ of the alternating current.Thread Series Designator
unc single end
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Terminal Type And Quantity
2 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 18-0421-01 | 49524 | 5 | - | 3 | 2 | - | CX |
| 18-421-1 | 49524 | 5 | - | 5 | 9 | - | CX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34760 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 6105-00-851-4692
What is the NIIN of the NSN 6105-00-851-4692?
The National Item Identification Number (NIIN) of the NSN 6105-00-851-4692 is 00-851-4692
When the NSN 6105-00-851-4692 was assigned to the Federal Catalog?
It was assigned 57 years ago, on Wed, Jan 11, 1967
Does the NSN 6105-00-851-4692 contain any precious metals?
Does not contain precious metal
Does the NSN 6105-00-851-4692 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products