Alternating Current Motor

2578182

(NSN) National Stock Number

6105-00-881-9979

Federal Supply Classification

6105 Electrical Motors

Item Name Code

00530

Schedule B Code

Summary

1.750 inches overall height, 3.143 inches overall length, 1.750 inches overall width, 0.1120 inches nominal single end spline minor diameter, 12 single end spline quantity, 0.1820 inches nominal single end shaft diameter

DAC	HCC	DMIL	RNCC
5	-	-	5

RNVC	SADC	MSDS	RNAAC
9	-	-	ZZ

Identification

A motor which is designed for operation from an alternating current source. See also motor, control.

INC	FIIG	Concept	Condition
00530	A271A0	1	1

Specifications

Overall Height

1.750 inches

Details

The distance measured in a straight line from the bottom to the top of an item.

Overall Length

3.143 inches

Details

A measurement of the longest dimension of an item,in distinction from width.

Overall Width

1.750 inches

Details

An overall measurement taken at right angles to the length of an item,in distinction from thickness.

Spline Minor Diameter

0.1120 inches nominal single end

Details

The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.

Spline Quantity

12 single end

Details

The number of splines on or in the item.

Shaft Diameter

0.1820 inches nominal single end

Details

The length of a straight line which passes through the center of a shaft,and terminates at the circumference.

Shaft Rotation Direction

counterclockwise single end

Details

The direction of rotation of a rotating shaft as viewed from the drive end.

Duty Cycle

continuous

Details

The working period under which the item was designed to operate.

Enclosure Feature

totally inclosed

Details

An indication of the feature/s/ of the enclosure.

Winding Type

induction-permanent split capacitor split phase

Details

Indicates the specific arrangement in which wire is wound on a form or is formed by winding.

Spline Length

0.3750 inches nominal single end

Details

A measurement of the longest dimension of a spline,in distinction from width.

Mounting Method

face

Details

The means of attaching the item.

Mounting Facility Type And Quantity

3 threaded hole

Details

Indicates the type and number of facilities by which the item is mounted.

Cooling Method

nonventilated

Details

The means of cooling used to maintain the required operating temperature of the item.

Current Rating Method

load

Details

The means by which the current is rated.

Torque Rating And Type

1.4 inch-ounces running

Details

Indicates the torque rating,and its type.

Inclosure Specification

commercial

Details

The government or industrial specification or standard that defines the inclosure feature.

Length Of Shaft From Housing

0.378 inches single end

Details

A measurement of the longest dimension of the shaft projection of an item,in distinction from width.

Temp Rating

-40.0 operating deg celsius and 75.0 operating deg celsius and 60.0 ambient deg celsius

Details

The temperature at which the item is designed to operate.

Mounting Facility Circle Diameter

1.290 inches

Details

The length of a straight line which passes through the center of a mounting facility circle,and terminates at the circumference.

Rotor Speed Rating In Rpm

6850.0 single full load

Details

The speed rating of a rotor,expressed in revolutions per minute.

Current Rating In Amps

0.180 single input

Details

The amount of current for which an item is rated,expressed in amperes.

Connection Type And Voltage Rating In Volts

115.0 line to neutral single input

Details

Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.

Shaft End Characteristic

a14 single style single end

Details

An indication of the characteristic(s) of the shaft end.

Phase

single input

Details

The number of alternating current phases.

Special Features

body style b3a except load end mounting

Details

Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.

Frequency In Hertz

400.0 input

Details

The cycles per second /hertz/ of the alternating current.

Terminal Type And Quantity

2 wire lead

Details

Indicates the type and number of terminals for providing electrical connection.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
C2161-8	05088	5	-	3	2	-	CX
C2161-8	88818	5	-	5	2	-	CX
2578182	00170	2	-	5	9	-	KE

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	A	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34760	-	W	-

RVC	WCC	TCC	SHC
-	593	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

LOCKHEED MARTIN CORP DIV RMS - MITCHEL FIELD

CAGE: 56232

UNIONDALE , NY , 11553-3682

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 6105-00-881-9979

What is the NIIN of the NSN 6105-00-881-9979?

The National Item Identification Number (NIIN) of the NSN 6105-00-881-9979 is 00-881-9979

When the NSN 6105-00-881-9979 was assigned to the Federal Catalog?

It was assigned 63 years ago, on Mon, Jan 1, 1962

Does the NSN 6105-00-881-9979 contain any precious metals?

Does not contain precious metal

Does the NSN 6105-00-881-9979 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.