Motor-Tachometer Generator
165-065
(NSN) National Stock Number
6105-00-917-6898
Federal Supply Classification
6105 Electrical Motors
Item Name Code
28454
Schedule B Code
8412809000
Summary
1.060 inches overall height, 3.000 inches overall length, 1.060 inches overall width, 0.1242 inches nominal single end shaft diameter, ac input current type, 8000.0 feet maximum operating altitude rating
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | - | - | HH |
Identification
An item which is an electrical rotating machine combining both control motor and tachometer generator action. The control motor and tachometer generator may be contained in the same or separate housings. It is designed for servo application where instant response to input signal is essential. It is generally used in circuits where the output potential from the tachometer generator is fed back to prevent excessive oscillation and for assuring high stability in a servo loop. Excludes:dynamotor; and motor-generator.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 28454 | A271A0 | - | 1 |
Specifications
Overall Height
1.060 inches
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Length
3.000 inches
Details
A measurement of the longest dimension of an item,in distinction from width.Overall Width
1.060 inches
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Shaft Diameter
0.1242 inches nominal single end
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Current Type
ac input
Details
Indicates the type of current whether alternating,direct,or both.Maximum Operating Altitude Rating
8000.0 feet
Details
The maximum altitude at which the item is rated to function.Enclosure Feature
totally inclosed
Details
An indication of the feature/s/ of the enclosure.Mounting Method
face
Details
The means of attaching the item.Mounting Facility Type And Quantity
4 threaded hole
Details
Indicates the type and number of facilities by which the item is mounted.Excitor Type
separately excited
Details
Indicates the type of excitor provided.Calibration Speed In Rpm
1000.0
Details
The speed at which the calibration is determined,expressed in revolutions per minute.Cooling Method
air to air cooled
Details
The means of cooling used to maintain the required operating temperature of the item.Calibration Voltage Output Type In Volts
0.5 ac
Details
An indication of the type of calibration voltage output,expressed in volts.Torque Rating And Type
0.6 inch-ounces stalled
Details
Indicates the torque rating,and its type.Inclosure Specification
commercial
Details
The government or industrial specification or standard that defines the inclosure feature.Control Field Voltage Type And Rating In Volts
36.0 ac
Details
Indicates the type of control field voltage and its rating,expressed in volts.Features Provided
horizontal mounting position
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Power Rating
2.750 watts output
Details
The amount of electrical energy that can be dissipated.Length Of Shaft From Housing
0.313 inches single end
Details
A measurement of the longest dimension of the shaft projection of an item,in distinction from width.Temp Rating
0.0 operating deg celsius and 85.0 operating deg celsius
Details
The temperature at which the item is designed to operate.Mounting Facility Circle Diameter
0.812 inches
Details
The length of a straight line which passes through the center of a mounting facility circle,and terminates at the circumference.Rotor Speed Rating In Rpm
3600.0 single no load
Details
The speed rating of a rotor,expressed in revolutions per minute.Connection Type And Voltage Rating In Volts
115.0 line to neutral single input
Details
Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.Shaft End Characteristic
a1 single style single end
Details
An indication of the characteristic(s) of the shaft end.Phase
single input
Details
The number of alternating current phases.Frequency In Hertz
400.0 output
Details
The cycles per second /hertz/ of the alternating current.Terminal Type And Quantity
8 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 2469761-1 | 10001 | 1 | - | 5 | 9 | - | HD |
| 20D604-5A | 3BMV1 | 5 | - | C | 1 | - | ZZ |
| 20D604-5A | 90012 | 3 | - | 3 | 9 | - | HH |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34760 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
MPC PRODUCTS CORPORATION DBA WOODWARD MPC, INC.
CAGE: 19710
NILES
, IL
, 60714-3406
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 6105-00-917-6898
What is the NIIN of the NSN 6105-00-917-6898?
The National Item Identification Number (NIIN) of the NSN 6105-00-917-6898 is 00-917-6898
When the NSN 6105-00-917-6898 was assigned to the Federal Catalog?
It was assigned 58 years ago, on Mon, Aug 1, 1966
Does the NSN 6105-00-917-6898 contain any precious metals?
Does not contain precious metal
Does the NSN 6105-00-917-6898 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products