Alternating Current Motor

94359900

(NSN) National Stock Number

6105-01-011-0432

Federal Supply Classification

6105 Electrical Motors

Item Name Code

00530

Schedule B Code

8501403040

Summary

8.500 inches overall height, 11.570 inches overall length, 6.600 inches overall width, 0.1875 inches nominal single end keyway width, 0.094 inches nominal single end keyway depth, 0.6245 inches minimum single end and 0.6250 inches maximum single end shaft diameter

DAC	HCC	DMIL	RNCC
1	-	-	5

RNVC	SADC	MSDS	RNAAC
2	-	-	CX

Identification

A motor which is designed for operation from an alternating current source. See also motor, control.

INC	FIIG	Concept	Condition
00530	A271A0	1	1

Specifications

Overall Height

8.500 inches

Details

The distance measured in a straight line from the bottom to the top of an item.

Overall Length

11.570 inches

Details

A measurement of the longest dimension of an item,in distinction from width.

Overall Width

6.600 inches

Details

An overall measurement taken at right angles to the length of an item,in distinction from thickness.

Keyway Width

0.1875 inches nominal single end

Details

A measurement taken at right angles to the length of a keyway,in distinction from thickness.

Keyway Depth

0.094 inches nominal single end

Details

A measurement from the top surface to the bottom of the keyway groove.

Shaft Diameter

0.6245 inches minimum single end and 0.6250 inches maximum single end

Details

The length of a straight line which passes through the center of a shaft,and terminates at the circumference.

Keyway Length

1.8800 inches nominal single end

Details

A measurement of the longest dimension of a keyway,in distinction from width.

Shaft Rotation Direction

counterclockwise single end

Details

The direction of rotation of a rotating shaft as viewed from the drive end.

Duty Cycle

continuous

Details

The working period under which the item was designed to operate.

Enclosure Feature

open protected

Details

An indication of the feature/s/ of the enclosure.

Winding Type

induction-single value capacitor split phase

Details

Indicates the specific arrangement in which wire is wound on a form or is formed by winding.

Mounting Method

flange

Details

The means of attaching the item.

Mounting Facility Type And Quantity

4 threaded hole

Details

Indicates the type and number of facilities by which the item is mounted.

Cooling Method

natural convection ventilated

Details

The means of cooling used to maintain the required operating temperature of the item.

Torque Rating And Type

36.0 foot-ounces stalled

Details

Indicates the torque rating,and its type.

Inclosure Specification

nema

Details

The government or industrial specification or standard that defines the inclosure feature.

Features Provided

thermal protective device and horizontal mounting position and vertical mounting position

Details

Those features,not otherwise specified,which may be required for proper functioning of the item.

Frame Size Designation

56c

Details

A designation indicating the frame size by which the item is identified.

Power Rating

0.2500 horsepower output

Details

The amount of electrical energy that can be dissipated.

Length Of Shaft From Housing

1.940 inches single end

Details

A measurement of the longest dimension of the shaft projection of an item,in distinction from width.

Temp Rating

50.0 operating deg celsius and 55.0 ambient deg celsius

Details

The temperature at which the item is designed to operate.

Mounting Facility Circle Diameter

5.875 inches

Details

The length of a straight line which passes through the center of a mounting facility circle,and terminates at the circumference.

Rotor Speed Rating In Rpm

1770.0 single full load

Details

The speed rating of a rotor,expressed in revolutions per minute.

Current Rating In Amps

25.000 single input

Details

The amount of current for which an item is rated,expressed in amperes.

Connection Type And Voltage Rating In Volts

208.0 line to neutral low input or 220.0 line to neutral high input

Details

Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.

Shaft End Characteristic

a9 single style single end

Details

An indication of the characteristic(s) of the shaft end.

Phase

single input

Details

The number of alternating current phases.

Frequency In Hertz

50.0 input or 60.0 input

Details

The cycles per second /hertz/ of the alternating current.

Terminal Type And Quantity

4 wire lead

Details

Indicates the type and number of terminals for providing electrical connection.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
73184610	59661	5	-	5	9	-	CX
94359900	19333	1	-	5	9	-	CX
1822901003	51064	5	-	3	9	-	CX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	A	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34760	-	W	-

RVC	WCC	TCC	SHC
-	593	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

SL MONTEVIDEO TECHNOLOGY, INC. DBA SL-MTI

CAGE: 54572

PLEASANT PRAIRIE , WI , 53158-5820

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 6105-01-011-0432

What is the NIIN of the NSN 6105-01-011-0432?

The National Item Identification Number (NIIN) of the NSN 6105-01-011-0432 is 01-011-0432

When the NSN 6105-01-011-0432 was assigned to the Federal Catalog?

It was assigned 49 years ago, on Sun, Oct 12, 1975

Does the NSN 6105-01-011-0432 contain any precious metals?

Does not contain precious metal

Does the NSN 6105-01-011-0432 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.