Alternating Current Motor
H61-A
(NSN) National Stock Number
6105-01-014-8684
Federal Supply Classification
6105 Electrical Motors
Item Name Code
00530
Schedule B Code
8501402040
Summary
1.875 inches overall height, 2.895 inches overall length, 1.875 inches overall width, 0.1400 inches nominal single end spline minor diameter, 6 single end spline quantity, 0.175 inches nominal single end shaft diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | CX |
Identification
A motor which is designed for operation from an alternating current source. See also motor, control.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00530 | A271A0 | 1 | 1 |
Specifications
Overall Height
1.875 inches
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Length
2.895 inches
Details
A measurement of the longest dimension of an item,in distinction from width.Overall Width
1.875 inches
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Spline Minor Diameter
0.1400 inches nominal single end
Details
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.Spline Quantity
6 single end
Details
The number of splines on or in the item.Shaft Diameter
0.175 inches nominal single end
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Rotation Direction
counterclockwise single end
Details
The direction of rotation of a rotating shaft as viewed from the drive end.Duty Cycle
continuous
Details
The working period under which the item was designed to operate.Enclosure Feature
totally inclosed
Details
An indication of the feature/s/ of the enclosure.Winding Type
induction-squirrel cage
Details
Indicates the specific arrangement in which wire is wound on a form or is formed by winding.Spline Length
0.2500 inches nominal single end
Details
A measurement of the longest dimension of a spline,in distinction from width.Mounting Method
flange
Details
The means of attaching the item.Mounting Facility Type And Quantity
4 threaded hole
Details
Indicates the type and number of facilities by which the item is mounted.Cooling Method
nonventilated
Details
The means of cooling used to maintain the required operating temperature of the item.Torque Rating And Type
5.0 inch-ounces running and 8.5 inch-ounces stalled
Details
Indicates the torque rating,and its type.Features Provided
horizontal mounting position and vertical mounting position
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Power Rating
44.4000 watts output
Details
The amount of electrical energy that can be dissipated.Length Of Shaft From Housing
1.580 inches single end
Details
A measurement of the longest dimension of the shaft projection of an item,in distinction from width.Temp Rating
-55.0 operating deg celsius and 225.0 operating deg celsius
Details
The temperature at which the item is designed to operate.Mounting Facility Circle Diameter
1.875 inches
Details
The length of a straight line which passes through the center of a mounting facility circle,and terminates at the circumference.Rotor Speed Rating In Rpm
6000.0 single full load
Details
The speed rating of a rotor,expressed in revolutions per minute.Connection Type And Voltage Rating In Volts
208.0 line to neutral single input
Details
Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.Shaft End Characteristic
a14 first style single end and a1 second style single end
Details
An indication of the characteristic(s) of the shaft end.Phase
single input
Details
The number of alternating current phases.Special Features
straight shaft groove d 2 places for o ring; second style shaft dia 0.218 in.
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Frequency In Hertz
400.0 input
Details
The cycles per second /hertz/ of the alternating current.Terminal Type And Quantity
3 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34760 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
MPC PRODUCTS CORPORATION DBA WOODWARD MPC, INC.
CAGE: 19710
NILES
, IL
, 60714-3406
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 6105-01-014-8684
What is the NIIN of the NSN 6105-01-014-8684?
The National Item Identification Number (NIIN) of the NSN 6105-01-014-8684 is 01-014-8684
When the NSN 6105-01-014-8684 was assigned to the Federal Catalog?
It was assigned 49 years ago, on Thu, Jan 8, 1976
Does the NSN 6105-01-014-8684 contain any precious metals?
Does not contain precious metal
Does the NSN 6105-01-014-8684 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.