Alternating Current Motor

M904E7SDS

(NSN) National Stock Number

6105-01-027-6853

Federal Supply Classification

6105 Electrical Motors

Item Name Code

00530

Schedule B Code

Summary

7.500 inches overall height, 7.4375 inches overall length, 5.625 inches overall width, case accessory components, clockwise or counterclockwise identical ends shaft rotation direction, damper or valve drive specific use

DAC	HCC	DMIL	RNCC
5	-	-	5

RNVC	SADC	MSDS	RNAAC
9	-	-	XX

Identification

A motor which is designed for operation from an alternating current source. See also motor, control.

INC	FIIG	Concept	Condition
00530	A271A0	1	1

Specifications

Overall Height

7.500 inches

Details

The distance measured in a straight line from the bottom to the top of an item.

Overall Length

7.4375 inches

Details

A measurement of the longest dimension of an item,in distinction from width.

Overall Width

5.625 inches

Details

An overall measurement taken at right angles to the length of an item,in distinction from thickness.

Accessory Components

case

Details

The additional parts supplied with the item which may be required for application.

Shaft Rotation Direction

clockwise or counterclockwise identical ends

Details

The direction of rotation of a rotating shaft as viewed from the drive end.

Specific Use

damper or valve drive

Details

The required purpose or application for which the item is designed.

Width Across Flats

0.3750 inches nominal identical ends

Details

The shortest straight line between flats,perpendicular to the height.

Mounting Facility Type And Quantity

3 threaded hole and 4 unthreaded hole

Details

Indicates the type and number of facilities by which the item is mounted.

Torque Rating And Type

150.0 foot-pounds running

Details

Indicates the torque rating,and its type.

Shaft End Style

squared identical ends

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft end.

Features Provided

horizontal mounting position

Details

Those features,not otherwise specified,which may be required for proper functioning of the item.

Shaft Center To Mounting Surface Distance

3.34375 inches identical ends

Details

The distance between the center of the shaft to the mounting surface.

Nominal Center To Center Distance Between Mounting Facilities Parallel To Length

4.063 inches

Details

The nominal center to center distance between the mounting facilities parallel to the length.

Temp Rating

-40.0 operating deg fahrenheit and 125.0 operating deg fahrenheit

Details

The temperature at which the item is designed to operate.

Nominal Center To Center Distance Between Mounting Facilities Parallel To Width

2.875 inches

Details

The nominal center to center distance between the mounting facilities parallel to the width.

Connection Type And Voltage Rating In Volts

24.0 line to neutral single input

Details

Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.

Phase

single input

Details

The number of alternating current phases.

Special Features

with internal balance relay,160 deg stroke,60 sec timing

Details

Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.

Frequency In Hertz

50.0 or 60.0 input

Details

The cycles per second /hertz/ of the alternating current.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
5M7361-220-15	D1901	6	-	5	2	-	ZG
1042623	12204	6	-	5	9	-	AX
954A1035	27319	6	-	5	9	-	TX
M644A1024	27319	5	-	5	9	-	CX
M904E1002	27319	5	-	5	9	-	AX
M904E10WQ154B1SW	27319	X	-	5	9	-	XX
M9184D1021	27319	5	-	3	2	-	ZZ
M944A1010	27319	4	-	5	9	-	75
M954A1035	27319	5	-	5	9	-	CX
M954A1036	27319	6	-	5	9	-	TX
M904A1K1	17479	5	-	5	9	-	XX
M904E1002-2	17479	6	-	5	9	-	TX
M904E1358-2	17479	6	-	5	9	-	TX
1042623	70219	6	-	5	9	-	AX
M904E1002-2	08987	5	-	5	9	-	XX
R255-4	84768	E	-	5	9	-	CX