Circulating Fan
A153-CC586
(NSN) National Stock Number
4140-00-015-6729
Federal Supply Classification
4140 Fans, Air Circulators and Blower Equipment
Item Name Code
30260
Schedule B Code
8414599080
Summary
Single speed speed adjustments, 6.260 inches minimum and 6.500 inches maximum length, inward flow direction, moisture resistant environmental protection, -32.0 deg celsius and 70.0 deg celsius ambient temp at full rated power, 5400.0 operating speed at rated capacity in rpm
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
A nonpositive displacement mechanical device having an axial fan impeller with or without a protective enclosure. It is designed to circulate air under free-airflow conditions, and may be equipped with a baffle(s) to deflect the air radially. It may be suspended from the ceiling, attached to the wall, or stand on a horizontal surface.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 30260 | A087A0 | - | 1 |
Specifications
Speed Adjustments
single speed
Details
The different speeds at which the item may be operated.Length
6.260 inches minimum and 6.500 inches maximum
Details
A measurement of the longest dimension of any object,in distinction from width.Flow Direction
inward
Details
The direction in which the fluid is passed through the item.Environmental Protection
moisture resistant
Details
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.Ambient Temp At Full Rated Power
-32.0 deg celsius and 70.0 deg celsius
Details
The temperature of the medium surrounding an item at which it can be operated continuously at full rated power.Operating Speed At Rated Capacity In Rpm
5400.0
Details
The speed of the drive shaft required to produce the rated capacity of an item,expressed in revolutions per minute.Electrical Connection Type
wire lead
Details
Indicates the type of electrical connection included on the item.Static Pressure At Specified Air Flow Rate
0.0 inches of water
Details
The static pressure measured at the air flow rate specified.Drive Type
direct
Details
Indicates the type of drive for turning,rotating,or positioning the mechanism.Prime Mover Type
electric motor
Details
Indicates the type of prime mover included with the unit.Inclosure Type
fully inclosed
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
4 threaded hole
Details
Indicates the type and number of facilities by which the item is mounted.Rotation Direction For Which Designed
clockwise
Details
The direction of rotation for which the item is designed.Air Flow Rate
1600.0 cubic feet per minute maximum
Details
The rated capacity of air flow moved through the item.Voltage In Volts And Current Type
208.0 ac
Details
The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.Prime Mover Power Rating
0.600 horsepower
Details
The rated power of the prime mover.Phase
three
Details
The number of alternating current phases.Frequency In Hertz
400.0
Details
The cycles per second /hertz/ of the alternating current.Material
aluminum blade
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Surface Treatment
anodize blade
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Style Designator
fixed
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
24930-g830054s1 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| G830054S1 | 24930 | 1 | - | 5 | 9 | - | CX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 00000 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 752 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 4140-00-015-6729
What is the NIIN of the NSN 4140-00-015-6729?
The National Item Identification Number (NIIN) of the NSN 4140-00-015-6729 is 00-015-6729
When the NSN 4140-00-015-6729 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Thu, Oct 19, 1972
Does the NSN 4140-00-015-6729 contain any precious metals?
Type/content is unknown
Does the NSN 4140-00-015-6729 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products