Radio Frequency Interfere Filter
2832202
(NSN) National Stock Number
5915-00-003-5319
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00765
Schedule B Code
8527995030
Summary
1.262 inches nominal overall length, 0.580 inches maximum body length, 0.370 inches minimum and 0.430 inches maximum body outside diameter, -55.0 to 85.0 deg celsius operating temp range, 50.0 ohms blank source impedance rating per function, 50.0 ohms blank load impedance per function
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | HD |
Identification
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes:items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes:filter, low pass and suppressor, ignition interference. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. See also limiter, electrical noise.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00765 | A047B0 | 3 | 1 |
Specifications
Overall Length
1.262 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Length
0.580 inches maximum
Details
A measurement of the longest dimension of the body,in distinction from width.Body Outside Diameter
0.370 inches minimum and 0.430 inches maximum
Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Operating Temp Range
-55.0 to 85.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Source Impedance Rating Per Function
50.0 ohms blank
Details
The total opposition per function,presented by a source of energy to the input terminals of an item.Load Impedance Per Function
50.0 ohms blank
Details
The total opposition per function,presented by a load to the output terminals of an item.Operating Current Rating Per Function In Amps
1.0 blank
Details
The level of electrical flow,per function,for which the item is designed to operate,expressed in ampers.Maximum Voltage Drop Per Function
220.0 millivolts dc blank
Details
The greatest amount of voltage loss per function,resulting from the devices inherent opposition to the flow of electrical current.Principal Circuitry Type Per Function
inductance-capacitance blank
Details
Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.Mounting Facility Screw Thread Series Designator
unf
Details
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.Inclosure Type
hermetically sealed
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
1 threaded bushing
Details
Indicates the type and number of facilities by which the item is mounted.Functional Terminal Type And Quantity
1 tab, solder lug input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 tab, solder lug output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Operating Voltage Rating And Type Per Function
150.0 volts dc blank
Details
The level of electrical potential and type of current,per function,for which the item is designed.Nominal Thread Size
0.250 inches
Details
A designation that is used for the purpose of general identification of the thread.Maximum Dielectric Withstanding Dc Voltage
150.0 volts at sea level
Details
The maximum direct current voltage that the insulating material/s/ of the item will withstand without resulting in disruptive discharge or deterioration.Style Designator
round terminal/terminals on opposite surfaces
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 9001-103-1006 | 12294 | 5 | - | 5 | 9 | - | HD |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58500 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
CAGE: 10001
WASHINGTON
, DC
, 20376
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-003-5319
What is the NIIN of the NSN 5915-00-003-5319?
The National Item Identification Number (NIIN) of the NSN 5915-00-003-5319 is 00-003-5319
When the NSN 5915-00-003-5319 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Fri, May 26, 1972
Does the NSN 5915-00-003-5319 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-003-5319 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products