Radio Frequency Interfere Filter
F18002
(NSN) National Stock Number
5915-00-004-5981
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00765
Schedule B Code
8527995030
Summary
1.844 inches nominal overall length, 1.188 inches nominal body length, 0.625 inches nominal body outside diameter, +10.0 to 500.0 vibration resistance range in hertz, -55.0 to 85.0 deg celsius operating temp range, 50.0 ohms blank source impedance rating per function
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes:items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes:filter, low pass and suppressor, ignition interference. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. See also limiter, electrical noise.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00765 | A047B0 | 3 | 1 |
Specifications
Overall Length
1.844 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Length
1.188 inches nominal
Details
A measurement of the longest dimension of the body,in distinction from width.Body Outside Diameter
0.625 inches nominal
Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Vibration Resistance Range In Hertz
+10.0 to 500.0
Details
The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.Operating Temp Range
-55.0 to 85.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Source Impedance Rating Per Function
50.0 ohms blank
Details
The total opposition per function,presented by a source of energy to the input terminals of an item.Load Impedance Per Function
50.0 ohms blank
Details
The total opposition per function,presented by a load to the output terminals of an item.Power Line Frequency Rating Per Function In Hertz
400.0 blank
Details
The cycles per second /hertz/ of the power line alternating current.Operating Current Rating Per Function In Amps
2.0 blank all functions
Details
The level of electrical flow,per function,for which the item is designed to operate,expressed in ampers.Principal Circuitry Type Per Function
inductance-capacitance blank
Details
Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.Mounting Facility Screw Thread Series Designator
unf
Details
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.Inclosure Type
encased
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
1 threaded bushing
Details
Indicates the type and number of facilities by which the item is mounted.Functional Terminal Type And Quantity
1 tab, solder lug input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 tab, solder lug output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Operating Voltage Rating And Type Per Function
125.0 volts ac blank and 320.0 volts dc blank
Details
The level of electrical potential and type of current,per function,for which the item is designed.Nominal Thread Size
0.312 inches
Details
A designation that is used for the purpose of general identification of the thread.Maximum Dielectric Withstanding Dc Voltage
640.0 volts at sea level
Details
The maximum direct current voltage that the insulating material/s/ of the item will withstand without resulting in disruptive discharge or deterioration.Special Features
inductor at mounting end
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Special Test Features
burn-in
Details
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.Style Designator
round terminal/terminals on opposite surfaces
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| JN17-3866A | 56289 | 1 | - | 5 | 9 | - | TX |
| 7637617P0002 | 99971 | 5 | - | C | 1 | - | ZZ |
| 7637617P2 | 99971 | 1 | - | 3 | 9 | - | TX |
| JN17-3866A | 13619 | 5 | - | 5 | 2 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58500 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
LCR ELECTRONICS, INC DIV LCR ELECTRONICS, INC. DBA ASTRODYNE TDI EMI FILTERS BU
CAGE: 0AM43
HACKETTSTOWN
, NJ
, 07840-3904
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-004-5981
What is the NIIN of the NSN 5915-00-004-5981?
The National Item Identification Number (NIIN) of the NSN 5915-00-004-5981 is 00-004-5981
When the NSN 5915-00-004-5981 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Wed, Jun 7, 1972
Does the NSN 5915-00-004-5981 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-004-5981 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products