Low Pass Filter

0N089567

0N089567
(NSN) National Stock Number
5915-00-005-3311
Federal Supply Classification
5915 Filters and Networks
Item Name Code
13911
Schedule B Code
8527995030
Summary

0.968 inches nominal overall length, 0.406 inches nominal body length, 0.350 inches nominal body outside diameter, -55.0 to 125.0 deg celsius operating temp range, 12.5 megahertz blank reference frequency per function, 0.01 ohms blank source impedance rating per function

DAC HCC DMIL RNCC
2 - - 3
RNVC SADC MSDS RNAAC
2 - - XN
Identification

An item designed to pass all frequencies below a specified frequency. Excludes:a single inductance, a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).

INC FIIG Concept Condition
13911 A047B0 3 1
Specifications
Overall Length
0.968 inches nominal
Details The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
Body Length
0.406 inches nominal
Details A measurement of the longest dimension of the body,in distinction from width.
Body Outside Diameter
0.350 inches nominal
Details The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
Operating Temp Range
-55.0 to 125.0 deg celsius
Details The minimum and maximum limits of temperature at which the item is rated for operation.
Reference Frequency Per Function
12.5 megahertz blank
Details The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.
Source Impedance Rating Per Function
0.01 ohms blank
Details The total opposition per function,presented by a source of energy to the input terminals of an item.
Mounting Facility Screw Thread Series Designator
unf
Details A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.
Inclosure Type
hermetically sealed
Details Indicates the type of inclosure provided to coat,cover,protect,or encase the item.
Width Across Flats
0.250 inches nominal
Details The shortest straight line between flats,perpendicular to the height.
Mounting Facility Type And Quantity
1 threaded bushing 3rd function
Details Indicates the type and number of facilities by which the item is mounted.
Insertion Loss At Reference Frequency Per Function In Decibels
15.0 blank
Details The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.
Functional Terminal Type And Quantity
1 tab, solder lug input 1st function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Functional Terminal Type And Quantity
1 tab, solder lug output 2nd function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Specified Frequencies Of Discrimination Per Function
20.00 megahertz 2nd low pass 2nd function
Details The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.
Specified Frequencies Of Discrimination Per Function
100.00 megahertz 3rd low pass 3rd function
Details The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.
Specified Frequencies Of Discrimination Per Function
5.00 megahertz 1st low pass 1st function
Details The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.
Specified Frequencies Of Discrimination Per Function
400.00 megahertz 4th low pass 4th function
Details The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.
Nominal Thread Size
0.250 inches
Details A designation that is used for the purpose of general identification of the thread.
Frequency Band Width Per Function
5.00 megahertz blank and 21.66 megahertz blank
Details The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.
Discrimination At Specified Frequencies Per Function In Decibels
15.0 nominal blank and 60.0 nominal blank
Details The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.
Maximum Dielectric Withstanding Dc Voltage
100.0 volts at sea level
Details The maximum direct current voltage that the insulating material/s/ of the item will withstand without resulting in disruptive discharge or deterioration.
Style Designator
round terminal/terminals on opposite surfaces
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
Test Data Document
98230-0n089567 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Details The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
P U - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
34450 - P P
RVC WCC TCC SHC
- 72D Z Z

What's Included?

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • Friendly service to back every order
Manufacturer
NATIONAL SECURITY AGENCY
CAGE: 98230
FORT GEORGE G MEADE , MD , 20755-6718
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-005-3311
What is the NIIN of the NSN 5915-00-005-3311?
The National Item Identification Number (NIIN) of the NSN 5915-00-005-3311 is 00-005-3311
When the NSN 5915-00-005-3311 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Wed, Jun 14, 1972
Does the NSN 5915-00-005-3311 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-005-3311 contain any hazardous material?
No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Who we are?

At Aerospace Shop, we are dedicated to providing high-quality aerospace components, shop supplies, replacement parts, and tools.

With a commitment to excellence and customer satisfaction, we aim to be your trusted partner in the aerospace industry.

Contact
800 Town and Country Blvd
Houston, TX, 77024
United States
© 2024 Aerospace Shop, Inc. All rights reserved.
Made in USA