Low Pass Filter
0N057330-3
(NSN) National Stock Number
5915-00-005-7140
Federal Supply Classification
5915 Filters and Networks
Item Name Code
13911
Schedule B Code
8527995030
Summary
2.350 inches nominal overall length, 1.350 inches nominal body length, 0.380 inches nominal body outside diameter, -55.0 to 125.0 deg celsius operating temp range, 10000.0 average life rating in hours, 1.1 megahertz blank reference frequency per function
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | XN |
Identification
An item designed to pass all frequencies below a specified frequency. Excludes:a single inductance, a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13911 | A047B0 | 3 | 1 |
Specifications
Overall Length
2.350 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Length
1.350 inches nominal
Details
A measurement of the longest dimension of the body,in distinction from width.Body Outside Diameter
0.380 inches nominal
Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Operating Temp Range
-55.0 to 125.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Average Life Rating In Hours
10000.0
Details
The numeric value indicating the average life expectancy for which the item is rated,expressed in hours.Reference Frequency Per Function
1.1 megahertz blank
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Source Impedance Rating Per Function
75.0 ohms blank
Details
The total opposition per function,presented by a source of energy to the input terminals of an item.Load Impedance Per Function
5.0 kilohms blank
Details
The total opposition per function,presented by a load to the output terminals of an item.Principal Circuitry Type Per Function
inductance-capacitance blank
Details
Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.Inclosure Type
hermetically sealed
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
1 connector
Details
Indicates the type and number of facilities by which the item is mounted.Insertion Loss At Reference Frequency Per Function In Decibels
1.0 blank
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Specified Frequencies Of Discrimination Per Function
200.00 kilohertz blank and 2.00 megahertz blank and 30.00 megahertz blank and 750.00 megahertz blank
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Frequency Band Width Per Function
200.00 kilohertz blank and 2.00 megahertz blank
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Discrimination At Specified Frequencies Per Function In Decibels
1.0 maximum blank and 3.0 minimum blank and 40.0 minimum blank 1st function
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Unpackaged Unit Weight
50.000 grams nominal
Details
The measured weight of an item unencumered by packaging or packing material.Style Designator
round terminal/terminals on opposite surfaces
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34450 | - | P | P |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | Z |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
NATIONAL SECURITY AGENCY
CAGE: 98230
FORT GEORGE G MEADE
, MD
, 20755-6718
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-005-7140
What is the NIIN of the NSN 5915-00-005-7140?
The National Item Identification Number (NIIN) of the NSN 5915-00-005-7140 is 00-005-7140
When the NSN 5915-00-005-7140 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Fri, Jun 9, 1972
Does the NSN 5915-00-005-7140 contain any precious metals?
Does not contain precious metal
Does the NSN 5915-00-005-7140 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.