Low Pass Filter
25-15LPF
(NSN) National Stock Number
5915-00-007-7722
Federal Supply Classification
5915 Filters and Networks
Item Name Code
13911
Schedule B Code
8527995030
Summary
7.219 inches nominal overall length, 1.188 inches nominal body outside diameter, 0.125 inches nominal unthreaded mounting hole diameter, 0.906 inches nominal distance between centerlines of mounting facilities parallel to body length, +10.0 to 500.0 vibration resistance range in hertz, 0.906 inches nominal distance between centerlines of mounting facilities parallel to body width
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | TX |
Identification
An item designed to pass all frequencies below a specified frequency. Excludes:a single inductance, a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13911 | A047B0 | 3 | 1 |
Specifications
Overall Length
7.219 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Outside Diameter
1.188 inches nominal
Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Unthreaded Mounting Hole Diameter
0.125 inches nominal
Details
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
0.906 inches nominal
Details
The distance between centerlines of mounting facilities parallel to the length of the item.Vibration Resistance Range In Hertz
+10.0 to 500.0
Details
The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
0.906 inches nominal
Details
The distance between centerlines of mounting facilities parallel to the width of the item.Operating Temp Range
-54.0 to 125.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Reference Frequency Per Function
1.085 megahertz blank
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Source Impedance Rating Per Function
50.0 ohms blank
Details
The total opposition per function,presented by a source of energy to the input terminals of an item.Load Impedance Per Function
50.0 ohms blank
Details
The total opposition per function,presented by a load to the output terminals of an item.Input Impedance Per Function W/Load
50.0 ohms blank
Details
The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).Output Impedance Per Function W/Source Across Input
50.0 ohms blank
Details
The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).Principal Circuitry Type Per Function
inductance-capacitance blank
Details
Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.Inclosure Type
encased
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
4 unthreaded hole
Details
Indicates the type and number of facilities by which the item is mounted.Insertion Loss At Reference Frequency Per Function In Decibels
3.0 blank
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Functional Terminal Type And Quantity
1 connector, receptacle input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 connector, receptacle output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Specified Frequencies Of Discrimination Per Function
950.00 gigahertz blank and 1.22 gigahertz blank and 1.75 gigahertz blank and 11.00 gigahertz blank
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Body Material
metal
Details
The chemical compound or mechanical mixture properties of which the body is fabricated.Frequency Band Width Per Function
950.00 megahertz blank and 1.22 gigahertz blank
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Discrimination At Specified Frequencies Per Function In Decibels
0.5 maximum blank and 0.7 maximum blank and 65.0 minimum blank 1st function
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Style Designator
round terminal/terminals on opposite surfaces
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| LA-F77 | 00929 | 5 | - | 5 | 2 | - | TX |
| LAP77 | 00929 | 5 | - | 5 | 9 | - | TX |
| 54330520 | 95750 | 5 | - | 3 | 9 | - | TX |
| 25-15LPF(M1) | 94375 | 5 | - | 5 | 2 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 21275 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
LAX ELECTRONICS, INC. DBA AUTOMATIC CONNECTOR DIV AUTOMATIC CONNECTOR
CAGE: 94375
HAUPPAUGE
, NY
, 11788-4019
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-007-7722
What is the NIIN of the NSN 5915-00-007-7722?
The National Item Identification Number (NIIN) of the NSN 5915-00-007-7722 is 00-007-7722
When the NSN 5915-00-007-7722 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Thu, Jul 6, 1972
Does the NSN 5915-00-007-7722 contain any precious metals?
Does not contain precious metal
Does the NSN 5915-00-007-7722 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products