Low Pass Filter
0N088831
(NSN) National Stock Number
5915-00-014-6598
Federal Supply Classification
5915 Filters and Networks
Item Name Code
13911
Schedule B Code
8527995030
Summary
1.668 inches nominal overall length, 0.650 inches nominal body length, -55.0 to 125.0 deg celsius operating temp range, 1000.0 average life rating in hours, 2.5 megahertz blank reference frequency per function, inductance-capacitance blank principal circuitry type per function
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | XN |
Identification
An item designed to pass all frequencies below a specified frequency. Excludes:a single inductance, a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13911 | A047B0 | 3 | 1 |
Specifications
Overall Length
1.668 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Length
0.650 inches nominal
Details
A measurement of the longest dimension of the body,in distinction from width.Operating Temp Range
-55.0 to 125.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Average Life Rating In Hours
1000.0
Details
The numeric value indicating the average life expectancy for which the item is rated,expressed in hours.Reference Frequency Per Function
2.5 megahertz blank
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Principal Circuitry Type Per Function
inductance-capacitance blank
Details
Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.Mounting Facility Screw Thread Series Designator
unc
Details
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.Inclosure Type
encased
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Width Across Flats
0.250 inches nominal
Details
The shortest straight line between flats,perpendicular to the height.Mounting Facility Type And Quantity
1 threaded stud 1st function
Details
Indicates the type and number of facilities by which the item is mounted.Insertion Loss At Reference Frequency Per Function In Decibels
1.0 blank
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Functional Terminal Type And Quantity
1 wire lead input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 wire lead output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Specified Frequencies Of Discrimination Per Function
1.00 megahertz blank and 5.00 megahertz blank and 10.00 megahertz blank and 20.00 megahertz blank and 50.00 megahertz blank
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Nominal Thread Size
0.138 inches
Details
A designation that is used for the purpose of general identification of the thread.Frequency Band Width Per Function
1.00 megahertz blank and 5.00 megahertz blank
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Discrimination At Specified Frequencies Per Function In Decibels
1.0 nominal blank and 3.0 nominal blank and 10.0 nominal blank and 30.0 nominal blank and 50.0 nominal blank
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Style Designator
round terminal/terminals on opposite surfaces
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
98230-0n088831 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34450 | - | P | P |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | Z |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
NATIONAL SECURITY AGENCY
CAGE: 98230
FORT GEORGE G MEADE
, MD
, 20755-6718
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-014-6598
What is the NIIN of the NSN 5915-00-014-6598?
The National Item Identification Number (NIIN) of the NSN 5915-00-014-6598 is 00-014-6598
When the NSN 5915-00-014-6598 was assigned to the Federal Catalog?
It was assigned 56 years ago, on Mon, May 6, 1968
Does the NSN 5915-00-014-6598 contain any precious metals?
Does not contain precious metal
Does the NSN 5915-00-014-6598 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.