Low Pass Filter
LA-B54
(NSN) National Stock Number
5915-00-020-2407
Federal Supply Classification
5915 Filters and Networks
Item Name Code
13911
Schedule B Code
8527995030
Summary
3.550 inches nominal overall length, 0.875 inches maximum body outside diameter, -55.0 to 120.0 deg celsius operating temp range, 3.5 gigahertz blank reference frequency per function, 50.0 ohms blank source impedance rating per function, 50.0 ohms blank load impedance per function
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
An item designed to pass all frequencies below a specified frequency. Excludes:a single inductance, a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13911 | A047B0 | 3 | 1 |
Specifications
Overall Length
3.550 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Outside Diameter
0.875 inches maximum
Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Operating Temp Range
-55.0 to 120.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Reference Frequency Per Function
3.5 gigahertz blank
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Source Impedance Rating Per Function
50.0 ohms blank
Details
The total opposition per function,presented by a source of energy to the input terminals of an item.Load Impedance Per Function
50.0 ohms blank
Details
The total opposition per function,presented by a load to the output terminals of an item.Voltage Standing Wave Ratio Per Function
1.3 blank
Details
The ratio of the maximum to the minimum voltage of the standing wave per function. the larger relative portion is given,the lower value having an implied /not given/ value of one /unity/.Average Power Rating Per Function
10.0 watts blank
Details
The value of the average amount of electrical energy per function,which the item may pass or dissipate in continuous operation without degradation of physical or electrical characteristics.Inclosure Type
encased
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
1 clamp
Details
Indicates the type and number of facilities by which the item is mounted.Insertion Loss At Reference Frequency Per Function In Decibels
0.2 blank
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Functional Terminal Type And Quantity
1 connector, receptacle input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 connector, receptacle output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Specified Frequencies Of Discrimination Per Function
2.00 gigahertz blank and 5.00 gigahertz blank and 7.50 gigahertz blank and 30.00 gigahertz blank
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Body Material
metal
Details
The chemical compound or mechanical mixture properties of which the body is fabricated.Frequency Band Width Per Function
2.00 gigahertz blank and 5.00 gigahertz blank
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Discrimination At Specified Frequencies Per Function In Decibels
1.0 maximum blank and 55.0 minimum blank 1st function
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Body Surface Treatment
silver
Details
The metallic,nonmetallic,and/or chemical properties with which the body is plated,dipped and/or coated. the treatment is designed to protect the body surface/s/ and cannot be wiped off.Style Designator
round terminal/terminals on opposite surfaces
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 241-0432-00 | 13499 | 1 | - | 5 | 9 | - | TX |
| SM-C-438817 | 80063 | 1 | - | 3 | 2 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | S | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 21275 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 5915-00-020-2407
What is the NIIN of the NSN 5915-00-020-2407?
The National Item Identification Number (NIIN) of the NSN 5915-00-020-2407 is 00-020-2407
When the NSN 5915-00-020-2407 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5915-00-020-2407 contain any precious metals?
Contains silver
Does the NSN 5915-00-020-2407 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products