Band Pass Filter

112B2

(NSN) National Stock Number

5915-00-052-5247

Federal Supply Classification

5915 Filters and Networks

Item Name Code

00209

Schedule B Code

8527995030

Summary

1.844 inches nominal overall height, 2.500 inches maximum body length, 1.750 inches maximum body width, 1.500 inches maximum body height, 1.969 inches nominal distance between centerlines of mounting facilities parallel to body length, +5.0 to 33.0 vibration resistance range in hertz

DAC	HCC	DMIL	RNCC
5	-	-	3

RNVC	SADC	MSDS	RNAAC
2	-	-	TX

Identification

An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes:a single inductance, or a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).

INC	FIIG	Concept	Condition
00209	A047B0	3	1

Specifications

Overall Height

1.844 inches nominal

Details

The distance measured in a straight line from the bottom to the top of an item.

Body Length

2.500 inches maximum

Details

A measurement of the longest dimension of the body,in distinction from width.

Body Width

1.750 inches maximum

Details

A measurement taken at right angles to the length of the body,in distinction from thickness.

Body Height

1.500 inches maximum

Details

A measurement from the bottom to the top of the body,in distinction from depth.

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

1.969 inches nominal

Details

The distance between centerlines of mounting facilities parallel to the length of the item.

Vibration Resistance Range In Hertz

+5.0 to 33.0

Details

The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.219 inches nominal

Details

The distance between centerlines of mounting facilities parallel to the width of the item.

Operating Temp Range

+0.0 to 50.0 deg celsius

Details

The minimum and maximum limits of temperature at which the item is rated for operation.

Average Life Rating In Hours

2000.0

Details

The numeric value indicating the average life expectancy for which the item is rated,expressed in hours.

Reference Frequency Per Function

200.0 kilohertz blank

Details

The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.

Source Impedance Rating Per Function

8.2 kilohms blank

Details

The total opposition per function,presented by a source of energy to the input terminals of an item.

Load Impedance Per Function

8.2 kilohms blank

Details

The total opposition per function,presented by a load to the output terminals of an item.

Principal Circuitry Type Per Function

crystal blank

Details

Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.

Mounting Facility Screw Thread Series Designator

unc

Details

A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.

Inclosure Type

hermetically sealed

Details

Indicates the type of inclosure provided to coat,cover,protect,or encase the item.

Mounting Facility Type And Quantity

4 threaded stud all functions

Details

Indicates the type and number of facilities by which the item is mounted.

Features Provided

moisture resistant and shock resistant

Details

Those features,not otherwise specified,which may be required for proper functioning of the item.

Insertion Loss At Reference Frequency Per Function In Decibels

3.0 blank

Details

The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.

Functional Terminal Type And Quantity

1 tab, solder lug input 1st function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Functional Terminal Type And Quantity

1 tab, solder lug output 2nd function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Maximum Dielectric Withstanding Ac Rms Voltage

100.0 volts at sea level

Details

The maximum alternating current root mean square voltage that the insulating material/s/ of the item will withstand without resulting in disruptive discharge or deterioration.

Nominal Thread Size

0.138 inches

Details

A designation that is used for the purpose of general identification of the thread.

Body Material

metal

Details

The chemical compound or mechanical mixture properties of which the body is fabricated.

Frequency Band Width Per Function

199.95 kilohertz blank and 200.10 kilohertz blank

Details

The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.

Body Surface Treatment

tin

Details

The metallic,nonmetallic,and/or chemical properties with which the body is plated,dipped and/or coated. the treatment is designed to protect the body surface/s/ and cannot be wiped off.

Style Designator

rectangular terminal/terminals on one surface

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
2558885	10001	A	-	5	2	-	TX
BUWEPSDWG2558885	97384	5	-	5	2	-	TX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
P	A	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34450	-	P	-

RVC	WCC	TCC	SHC
-	72D	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

MICROSEMI CORP. - HIGH PERFORMANCE TIMING DBA MICROSEMI CORP - HIGH PERFORMANCE TIMING

CAGE: 00136

MOUNT HOLLY SPRINGS , PA , 17065-1821

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5915-00-052-5247

What is the NIIN of the NSN 5915-00-052-5247?

The National Item Identification Number (NIIN) of the NSN 5915-00-052-5247 is 00-052-5247

When the NSN 5915-00-052-5247 was assigned to the Federal Catalog?

It was assigned 57 years ago, on Tue, May 23, 1967

Does the NSN 5915-00-052-5247 contain any precious metals?

Does not contain precious metal

Does the NSN 5915-00-052-5247 contain any hazardous material?

No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.