Low Pass Filter

08-00691-000

(NSN) National Stock Number

5915-00-054-3044

Federal Supply Classification

5915 Filters and Networks

Item Name Code

13911

Schedule B Code

8527995030

Summary

1.568 inches minimum and 1.578 inches maximum overall length, 3.330 inches nominal overall height, 1.250 inches nominal body length, 3.000 inches nominal body height, 0.164 inches minimum and 0.169 inches maximum unthreaded mounting hole diameter, 0.750 inches nominal distance between centerlines of mounting facilities parallel to body length

DAC	HCC	DMIL	RNCC
1	-	-	3

RNVC	SADC	MSDS	RNAAC
2	-	-	TX

Identification

An item designed to pass all frequencies below a specified frequency. Excludes:a single inductance, a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).

INC	FIIG	Concept	Condition
13911	A047B0	3	1

Specifications

Overall Length

1.568 inches minimum and 1.578 inches maximum

Details

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

Overall Height

3.330 inches nominal

Details

The distance measured in a straight line from the bottom to the top of an item.

Body Length

1.250 inches nominal

Details

A measurement of the longest dimension of the body,in distinction from width.

Body Height

3.000 inches nominal

Details

A measurement from the bottom to the top of the body,in distinction from depth.

Unthreaded Mounting Hole Diameter

0.164 inches minimum and 0.169 inches maximum

Details

The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

0.750 inches nominal

Details

The distance between centerlines of mounting facilities parallel to the length of the item.

Vibration Resistance Range In Hertz

+10.0 to 500.0

Details

The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.750 inches nominal

Details

The distance between centerlines of mounting facilities parallel to the width of the item.

Operating Temp Range

-40.0 to 71.0 deg celsius

Details

The minimum and maximum limits of temperature at which the item is rated for operation.

Average Life Rating In Hours

10000.0

Details

The numeric value indicating the average life expectancy for which the item is rated,expressed in hours.

Reference Frequency Per Function

1.0 kilohertz blank

Details

The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.

Input Impedance Per Function W/Load

600.0 ohms blank

Details

The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).

Output Impedance Per Function W/Source Across Input

600.0 ohms blank

Details

The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).

Inclosure Type

hermetically sealed

Details

Indicates the type of inclosure provided to coat,cover,protect,or encase the item.

Mounting Facility Type And Quantity

2 unthreaded hole

Details

Indicates the type and number of facilities by which the item is mounted.

Insertion Loss At Reference Frequency Per Function In Decibels

2.5 blank

Details

The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.

Functional Terminal Type And Quantity

1 pin input 1st function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Functional Terminal Type And Quantity

1 pin output 2nd function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Functional Terminal Type And Quantity

2 pin ground 3rd function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Specified Frequencies Of Discrimination Per Function

300.00 hertz blank and 3.50 kilohertz blank and 4.00 kilohertz blank and 6.00 kilohertz blank

Details

The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.

Frequency Band Width Per Function

300.00 hertz blank and 3.50 kilohertz blank

Details

The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.

Discrimination At Specified Frequencies Per Function In Decibels

2.5 maximum blank and 25.0 minimum blank and 50.0 minimum blank 1st function

Details

The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.

Unpackaged Unit Weight

8.000 ounces nominal

Details

The measured weight of an item unencumered by packaging or packing material.

Style Designator

rectangular terminal/terminals on opposite surfaces

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Test Data Document

00724-08-00691-000 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Details

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
654-0079-000	21908	6	-	5	9	-	TX
CC-0968-000	32840	3	-	5	9	-	TX
CC0460-00	32840	5	-	5	9	-	TX
CC0968-00	32840	3	-	5	2	-	TX
21-0638-00	99480	6	-	5	9	-	TX
654-0079-000	10581	6	-	5	9	-	TX
701A104001	94271	5	-	5	9	-	TX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
P	A	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34450	-	P	-

RVC	WCC	TCC	SHC
-	658	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

RAYTHEON COMPANY DBA RAYTHEON DIV ADVANCED PRODUCTS & SOLUTIONS

CAGE: 00724

LARGO , FL , 33777-1444

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5915-00-054-3044

What is the NIIN of the NSN 5915-00-054-3044?

The National Item Identification Number (NIIN) of the NSN 5915-00-054-3044 is 00-054-3044

When the NSN 5915-00-054-3044 was assigned to the Federal Catalog?

It was assigned 56 years ago, on Wed, May 29, 1968

Does the NSN 5915-00-054-3044 contain any precious metals?

Does not contain precious metal

Does the NSN 5915-00-054-3044 contain any hazardous material?

No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.