Band Pass Filter
25-25884A01
(NSN) National Stock Number
5915-00-060-9139
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00209
Schedule B Code
8527995030
Summary
2.500 inches maximum overall length, 2.200 inches maximum body length, 1.200 inches maximum body width, 0.500 inches maximum body height, 1.900 inches nominal distance between centerlines of mounting facilities parallel to body length, 0.800 inches nominal distance between centerlines of mounting facilities parallel to body width
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes:a single inductance, or a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00209 | A047B0 | 3 | 1 |
Specifications
Overall Length
2.500 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Length
2.200 inches maximum
Details
A measurement of the longest dimension of the body,in distinction from width.Body Width
1.200 inches maximum
Details
A measurement taken at right angles to the length of the body,in distinction from thickness.Body Height
0.500 inches maximum
Details
A measurement from the bottom to the top of the body,in distinction from depth.Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
1.900 inches nominal
Details
The distance between centerlines of mounting facilities parallel to the length of the item.Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
0.800 inches nominal
Details
The distance between centerlines of mounting facilities parallel to the width of the item.Operating Temp Range
-55.0 to 100.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Reference Frequency Per Function
45.68 kilohertz blank
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Input Impedance Per Function W/Load
2.0 kilohms blank
Details
The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).Output Impedance Per Function W/Source Across Input
2.0 kilohms blank
Details
The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).Mounting Facility Screw Thread Series Designator
unc
Details
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.Inclosure Type
hermetically sealed
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
2 threaded hole
Details
Indicates the type and number of facilities by which the item is mounted.Insertion Loss At Reference Frequency Per Function In Decibels
2.0 blank
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Functional Terminal Type And Quantity
1 tab, solder lug ground 3rd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 tab, solder lug input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 tab, solder lug output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Specified Frequencies Of Discrimination Per Function
39.78 kilohertz blank and 42.53 kilohertz blank and 48.83 kilohertz blank and 51.58 kilohertz blank
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Nominal Thread Size
0.112 inches
Details
A designation that is used for the purpose of general identification of the thread.Body Material
metal
Details
The chemical compound or mechanical mixture properties of which the body is fabricated.Frequency Band Width Per Function
42.53 kilohertz blank and 48.83 kilohertz blank
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Discrimination At Specified Frequencies Per Function In Decibels
20.0 minimum blank and 3.0 maximum blank 1st function
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Special Features
terminals on one surface
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Style Designator
rectangular terminal/terminals on opposite surfaces
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 25-25884A01 | 94990 | 1 | - | 5 | 9 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58500 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
GENERAL DYNAMICS MISSION SYSTEMS, INC.
CAGE: 1VPW8
SCOTTSDALE
, AZ
, 85257-3812
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-060-9139
What is the NIIN of the NSN 5915-00-060-9139?
The National Item Identification Number (NIIN) of the NSN 5915-00-060-9139 is 00-060-9139
When the NSN 5915-00-060-9139 was assigned to the Federal Catalog?
It was assigned 62 years ago, on Tue, Jan 1, 1963
Does the NSN 5915-00-060-9139 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-060-9139 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products