Low Pass Filter
08-00680-000
(NSN) National Stock Number
5915-00-069-3876
Federal Supply Classification
5915 Filters and Networks
Item Name Code
13911
Schedule B Code
8527995030
Summary
0.750 inches nominal overall height, 3.000 inches nominal body length, 2.180 inches nominal body width, 0.500 inches nominal body height, 2.500 inches nominal distance between centerlines of mounting facilities parallel to body length, -28.0 to 65.0 deg celsius operating temp range
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | HD |
Identification
An item designed to pass all frequencies below a specified frequency. Excludes:a single inductance, a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13911 | A047B0 | 3 | 1 |
Specifications
Overall Height
0.750 inches nominal
Details
The distance measured in a straight line from the bottom to the top of an item.Body Length
3.000 inches nominal
Details
A measurement of the longest dimension of the body,in distinction from width.Body Width
2.180 inches nominal
Details
A measurement taken at right angles to the length of the body,in distinction from thickness.Body Height
0.500 inches nominal
Details
A measurement from the bottom to the top of the body,in distinction from depth.Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
2.500 inches nominal
Details
The distance between centerlines of mounting facilities parallel to the length of the item.Operating Temp Range
-28.0 to 65.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Reference Frequency Per Function
1.9 kilohertz blank
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Source Impedance Rating Per Function
600.0 ohms blank
Details
The total opposition per function,presented by a source of energy to the input terminals of an item.Load Impedance Per Function
1.0 kilohms blank
Details
The total opposition per function,presented by a load to the output terminals of an item.Principal Circuitry Type Per Function
inductance-capacitance blank
Details
Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.Mounting Facility Screw Thread Series Designator
unc
Details
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.Inclosure Type
encased
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
1 threaded hole 2nd function
Details
Indicates the type and number of facilities by which the item is mounted.Insertion Loss At Reference Frequency Per Function In Decibels
0.5 blank
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Functional Terminal Type And Quantity
1 pin input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 pin ground 3rd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 pin output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Maximum Dielectric Withstanding Ac Rms Voltage
15.0 volts at sea level
Details
The maximum alternating current root mean square voltage that the insulating material/s/ of the item will withstand without resulting in disruptive discharge or deterioration.Specified Frequencies Of Discrimination Per Function
300.00 hertz blank and 3.50 kilohertz blank and 5.00 kilohertz blank and 20.00 kilohertz blank
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Nominal Thread Size
0.112 inches
Details
A designation that is used for the purpose of general identification of the thread.Frequency Band Width Per Function
300.00 hertz blank and 3.50 kilohertz blank
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Discrimination At Specified Frequencies Per Function In Decibels
0.5 nominal blank and 25.0 nominal blank 1st function
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Style Designator
rectangular terminal/terminals on one surface
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
00724-08-00680-000 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 754-0004-000 | 21908 | 1 | - | 5 | 9 | - | HD |
| 754-0004-000 | 10581 | 1 | - | 3 | 2 | - | HD |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 21275 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
RAYTHEON COMPANY DBA RAYTHEON DIV ADVANCED PRODUCTS & SOLUTIONS
CAGE: 00724
LARGO
, FL
, 33777-1444
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-069-3876
What is the NIIN of the NSN 5915-00-069-3876?
The National Item Identification Number (NIIN) of the NSN 5915-00-069-3876 is 00-069-3876
When the NSN 5915-00-069-3876 was assigned to the Federal Catalog?
It was assigned 57 years ago, on Tue, Jul 18, 1967
Does the NSN 5915-00-069-3876 contain any precious metals?
Does not contain precious metal
Does the NSN 5915-00-069-3876 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products