Band Pass Filter
SM-C-456378
(NSN) National Stock Number
5915-00-078-7854
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00209
Schedule B Code
8527995030
Summary
2.220 inches minimum and 2.280 inches maximum overall length, 0.820 inches maximum overall height, 1.970 inches minimum and 2.030 inches maximum overall width, 2.220 inches minimum and 2.280 inches maximum body length, 1.970 inches minimum and 2.030 inches maximum body width, 1.684 inches minimum and 1.716 inches maximum distance between centerlines of mounting facilities parallel to body length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes:a single inductance, or a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00209 | A047B0 | 3 | 1 |
Specifications
Overall Length
2.220 inches minimum and 2.280 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Overall Height
0.820 inches maximum
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Width
1.970 inches minimum and 2.030 inches maximum
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Body Length
2.220 inches minimum and 2.280 inches maximum
Details
A measurement of the longest dimension of the body,in distinction from width.Body Width
1.970 inches minimum and 2.030 inches maximum
Details
A measurement taken at right angles to the length of the body,in distinction from thickness.Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
1.684 inches minimum and 1.716 inches maximum
Details
The distance between centerlines of mounting facilities parallel to the length of the item.Vibration Resistance Range In Hertz
+10.0 to 55.0
Details
The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
1.484 inches minimum and 1.516 inches maximum
Details
The distance between centerlines of mounting facilities parallel to the width of the item.Operating Temp Range
-40.0 to 85.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Average Life Rating In Hours
10000.0
Details
The numeric value indicating the average life expectancy for which the item is rated,expressed in hours.Reference Frequency Per Function
1.5 kilohertz blank
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Source Impedance Rating Per Function
600.0 ohms blank
Details
The total opposition per function,presented by a source of energy to the input terminals of an item.Load Impedance Per Function
600.0 ohms blank
Details
The total opposition per function,presented by a load to the output terminals of an item.Input Impedance Per Function W/Load
600.0 ohms blank
Details
The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).Output Impedance Per Function W/Source Across Input
600.0 ohms blank
Details
The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).Mounting Facility Screw Thread Series Designator
unc
Details
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.Inclosure Type
encased
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
4 threaded hole
Details
Indicates the type and number of facilities by which the item is mounted.Insertion Loss At Reference Frequency Per Function In Decibels
1.0 blank
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Functional Terminal Type And Quantity
1 wire lead ground 3rd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 wire lead input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 wire lead output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Specified Frequencies Of Discrimination Per Function
200.00 hertz blank and 1.125 kilohertz blank and 1.875 kilohertz blank and 4.50 kilohertz blank
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Nominal Thread Size
0.138 inches
Details
A designation that is used for the purpose of general identification of the thread.Body Material
metal
Details
The chemical compound or mechanical mixture properties of which the body is fabricated.Frequency Band Width Per Function
1.125 kilohertz blank and 1.875 kilohertz blank
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Discrimination At Specified Frequencies Per Function In Decibels
20.0 minimum blank and 1.0 maximum blank 1st function
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Maximum Dielectric Withstanding Dc Voltage
100.0 volts at sea level
Details
The maximum direct current voltage that the insulating material/s/ of the item will withstand without resulting in disruptive discharge or deterioration.Special Features
terminals on one surface
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Style Designator
rectangular terminal/terminals on opposite surfaces
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 713810-046 | 82577 | 5 | - | 5 | 2 | - | TX |
| 713810-046 | 05869 | 5 | - | 5 | 2 | - | TX |
| BP-627A | 19130 | 5 | - | 5 | 9 | - | TX |
| JW10-362-A | 56289 | 5 | - | 5 | 2 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34450 | - | P | P |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 658 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
CAGE: 80063
ABERDEEN PROVING GROUND
, MD
, 21005
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-078-7854
What is the NIIN of the NSN 5915-00-078-7854?
The National Item Identification Number (NIIN) of the NSN 5915-00-078-7854 is 00-078-7854
When the NSN 5915-00-078-7854 was assigned to the Federal Catalog?
It was assigned 63 years ago, on Sun, Jan 1, 1961
Does the NSN 5915-00-078-7854 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-078-7854 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products