Radio Frequency Interfere Filter

JN17-4584A

(NSN) National Stock Number

5915-00-087-7182

Federal Supply Classification

5915 Filters and Networks

Item Name Code

00765

Schedule B Code

8527995030

Summary

4.812 inches maximum overall length, 2.688 inches minimum and 2.812 inches maximum body length, 0.938 inches minimum and 1.062 inches maximum body outside diameter, +10.0 to 2000.0 vibration resistance range in hertz, -65.0 to 85.0 deg celsius operating temp range, 50.0 ohms blank input impedance per function w/load

DAC	HCC	DMIL	RNCC
5	-	-	C

RNVC	SADC	MSDS	RNAAC
1	AF	-	ZZ

Identification

An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes:items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes:filter, low pass and suppressor, ignition interference. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. See also limiter, electrical noise.

INC	FIIG	Concept	Condition
00765	A047B0	3	1

Specifications

Overall Length

4.812 inches maximum

Details

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

Body Length

2.688 inches minimum and 2.812 inches maximum

Details

A measurement of the longest dimension of the body,in distinction from width.

Body Outside Diameter

0.938 inches minimum and 1.062 inches maximum

Details

The length of a straight line which passes through the center of the body,and terminates at the outside circumference.

Vibration Resistance Range In Hertz

+10.0 to 2000.0

Details

The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.

Operating Temp Range

-65.0 to 85.0 deg celsius

Details

The minimum and maximum limits of temperature at which the item is rated for operation.

Input Impedance Per Function W/Load

50.0 ohms blank

Details

The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).

Output Impedance Per Function W/Source Across Input

50.0 ohms blank

Details

The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).

Operating Current Rating Per Function In Amps

5.0 blank

Details

The level of electrical flow,per function,for which the item is designed to operate,expressed in ampers.

Principal Circuitry Type Per Function

inductance-capacitance single band pass

Details

Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.

Mounting Facility Screw Thread Series Designator

unef

Details

A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.

Inclosure Type

encased

Details

Indicates the type of inclosure provided to coat,cover,protect,or encase the item.

Mounting Facility Type And Quantity

1 threaded bushing 3rd function

Details

Indicates the type and number of facilities by which the item is mounted.

Functional Terminal Type And Quantity

1 tab, solder lug input 1st function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Functional Terminal Type And Quantity

1 tab, solder lug output 2nd function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Operating Voltage Rating And Type Per Function

100.0 volts dc blank

Details

The level of electrical potential and type of current,per function,for which the item is designed.

Nominal Thread Size

0.500 inches

Details

A designation that is used for the purpose of general identification of the thread.

Style Designator

round terminal/terminals on opposite surfaces

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Test Data Document

81349-mil-f-15733 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).

Details

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

Specification/Standard Data

81349-mil-f-15733/1 government specification

Details

The document designator of the specification or standard which established the item of supply.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
418951-3	96214	5	-	C	1	-	48
241-0724-010	95105	5	-	C	1	-	TX
FL22FD1EA3	81349	3	-	5	9	-	TX
M15733-01-0003	81349	E	-	2	2	-	ZZ
M15733-01-003	81349	3	-	C	1	-	ZZ
MIL-F-15733/1	81349	E	-	4	1	-	ZZ

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
P	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
58500	-	P	-

RVC	WCC	TCC	SHC
-	72D	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

SPRAGUE ELECTRIC CO WORLD HQS

CAGE: 56289

SANFORD , ME , 04073-7003

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5915-00-087-7182

What is the NIIN of the NSN 5915-00-087-7182?

The National Item Identification Number (NIIN) of the NSN 5915-00-087-7182 is 00-087-7182

When the NSN 5915-00-087-7182 was assigned to the Federal Catalog?

It was assigned 57 years ago, on Sat, May 6, 1967

Does the NSN 5915-00-087-7182 contain any precious metals?

Type/content is unknown

Does the NSN 5915-00-087-7182 contain any hazardous material?

No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.