Low Pass Filter

20-0350-00

20-0350-00
(NSN) National Stock Number
5915-00-107-2575
Federal Supply Classification
5915 Filters and Networks
Item Name Code
13911
Schedule B Code
8527995030
Summary

1.200 inches maximum overall height, 3.500 inches maximum body length, 0.610 inches maximum body width, 0.950 inches maximum body height, 3.100 inches nominal distance between centerlines of mounting facilities parallel to body length, -55.0 to 100.0 deg celsius operating temp range

DAC HCC DMIL RNCC
1 - - 5
RNVC SADC MSDS RNAAC
2 - - TX
Identification

An item designed to pass all frequencies below a specified frequency. Excludes:a single inductance, a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).

INC FIIG Concept Condition
13911 A047B0 3 1
Specifications
Overall Height
1.200 inches maximum
Details The distance measured in a straight line from the bottom to the top of an item.
Body Length
3.500 inches maximum
Details A measurement of the longest dimension of the body,in distinction from width.
Body Width
0.610 inches maximum
Details A measurement taken at right angles to the length of the body,in distinction from thickness.
Body Height
0.950 inches maximum
Details A measurement from the bottom to the top of the body,in distinction from depth.
Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
3.100 inches nominal
Details The distance between centerlines of mounting facilities parallel to the length of the item.
Operating Temp Range
-55.0 to 100.0 deg celsius
Details The minimum and maximum limits of temperature at which the item is rated for operation.
Reference Frequency Per Function
40.0 hertz blank
Details The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.
Source Impedance Rating Per Function
1.0 kilohms blank
Details The total opposition per function,presented by a source of energy to the input terminals of an item.
Load Impedance Per Function
1.0 kilohms blank
Details The total opposition per function,presented by a load to the output terminals of an item.
Mounting Facility Screw Thread Series Designator
unc
Details A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.
Inclosure Type
hermetically sealed
Details Indicates the type of inclosure provided to coat,cover,protect,or encase the item.
Mounting Facility Type And Quantity
2 threaded hole
Details Indicates the type and number of facilities by which the item is mounted.
Insertion Loss At Reference Frequency Per Function In Decibels
1.0 blank
Details The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.
Functional Terminal Type And Quantity
1 tab, solder lug input 1st function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Functional Terminal Type And Quantity
1 tab, solder lug output 2nd function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Functional Terminal Type And Quantity
2 tab, solder lug ground 3rd function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Specified Frequencies Of Discrimination Per Function
1.00 hertz blank and 80.00 hertz blank and 100.00 hertz blank and 1.00 kilohertz blank
Details The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.
Nominal Thread Size
0.112 inches
Details A designation that is used for the purpose of general identification of the thread.
Body Material
metal
Details The chemical compound or mechanical mixture properties of which the body is fabricated.
Frequency Band Width Per Function
1.00 hertz blank and 80.00 hertz blank
Details The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.
Discrimination At Specified Frequencies Per Function In Decibels
3.0 maximum blank and 30.0 minimum blank 1st function
Details The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.
Style Designator
rectangular terminal/terminals on one surface
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
673-1169-010 13499 1 - 3 9 - TX
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
P U - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
21275 - W -
RVC WCC TCC SHC
- 72D Z 9

What's Included?

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • Friendly service to back every order
Manufacturer
HISONIC, LLC
CAGE: 11402
OLATHE , KS , 66061-3107
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-107-2575
What is the NIIN of the NSN 5915-00-107-2575?
The National Item Identification Number (NIIN) of the NSN 5915-00-107-2575 is 00-107-2575
When the NSN 5915-00-107-2575 was assigned to the Federal Catalog?
It was assigned 56 years ago, on Wed, Jul 24, 1968
Does the NSN 5915-00-107-2575 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-107-2575 contain any hazardous material?
No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

At Aerospace Shop, we are dedicated to providing high-quality aerospace components, shop supplies, replacement parts, and tools.

With a commitment to excellence and customer satisfaction, we aim to be your trusted partner in the aerospace industry.

Contact
800 Town and Country Blvd
Houston, TX, 77024
United States
© 2024 Aerospace Shop, Inc. All rights reserved.
Made in USA