Band Pass Filter

2B136

2B136
(NSN) National Stock Number
5915-00-115-3635
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00209
Schedule B Code
8527995030
Summary

0.843 inches maximum overall height, 2.250 inches maximum body length, 0.750 inches maximum body width, 0.562 inches maximum body height, 2.000 inches maximum distance between centerlines of mounting facilities parallel to body length, +10.0 to 2000.0 vibration resistance range in hertz

DAC HCC DMIL RNCC
1 - - 5
RNVC SADC MSDS RNAAC
2 - - TX
Identification

An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes:a single inductance, or a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).

INC FIIG Concept Condition
00209 A047B0 3 1
Specifications
Overall Height
0.843 inches maximum
Details The distance measured in a straight line from the bottom to the top of an item.
Body Length
2.250 inches maximum
Details A measurement of the longest dimension of the body,in distinction from width.
Body Width
0.750 inches maximum
Details A measurement taken at right angles to the length of the body,in distinction from thickness.
Body Height
0.562 inches maximum
Details A measurement from the bottom to the top of the body,in distinction from depth.
Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
2.000 inches maximum
Details The distance between centerlines of mounting facilities parallel to the length of the item.
Vibration Resistance Range In Hertz
+10.0 to 2000.0
Details The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.
Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
0.250 inches nominal
Details The distance between centerlines of mounting facilities parallel to the width of the item.
Operating Temp Range
-55.0 to 85.0 deg celsius
Details The minimum and maximum limits of temperature at which the item is rated for operation.
Reference Frequency Per Function
30.0 megahertz blank
Details The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.
Source Impedance Rating Per Function
50.0 ohms blank
Details The total opposition per function,presented by a source of energy to the input terminals of an item.
Load Impedance Per Function
50.0 ohms blank
Details The total opposition per function,presented by a load to the output terminals of an item.
Input Impedance Per Function W/Load
2.0 kilohms blank
Details The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).
Output Impedance Per Function W/Source Across Input
50.0 ohms blank
Details The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).
Principal Circuitry Type Per Function
crystal blank
Details Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.
Mounting Facility Screw Thread Series Designator
unc
Details A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.
Inclosure Type
encased
Details Indicates the type of inclosure provided to coat,cover,protect,or encase the item.
Mounting Facility Type And Quantity
2 threaded hole
Details Indicates the type and number of facilities by which the item is mounted.
Insertion Loss At Reference Frequency Per Function In Decibels
2.5 blank
Details The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.
Functional Terminal Type And Quantity
1 pin input 1st function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Functional Terminal Type And Quantity
1 pin ground 3rd function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Functional Terminal Type And Quantity
1 pin output 2nd function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Specified Frequencies Of Discrimination Per Function
29.865 megahertz blank and 29.955 megahertz blank and 30.045 megahertz blank and 30.135 megahertz blank
Details The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.
Nominal Thread Size
0.086 inches
Details A designation that is used for the purpose of general identification of the thread.
Body Material
metal
Details The chemical compound or mechanical mixture properties of which the body is fabricated.
Frequency Band Width Per Function
29.955 megahertz blank and 30.045 megahertz blank
Details The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.
Discrimination At Specified Frequencies Per Function In Decibels
60.0 minimum blank and 6.0 nominal blank 1st function
Details The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.
Maximum Dielectric Withstanding Dc Voltage
200.0 volts at sea level
Details The maximum direct current voltage that the insulating material/s/ of the item will withstand without resulting in disruptive discharge or deterioration.
Body Surface Treatment
tin
Details The metallic,nonmetallic,and/or chemical properties with which the body is plated,dipped and/or coated. the treatment is designed to protect the body surface/s/ and cannot be wiped off.
Style Designator
rectangular terminal/terminals on one surface
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
Test Data Document
13499-293-1206-010 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Details The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
293-1206-010 13499 1 - 3 2 - TX
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
P U - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
58500 - P -
RVC WCC TCC SHC
- 593 Z 9

What's Included?

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • Friendly service to back every order
Manufacturer
MICROSEMI CORP. - HIGH PERFORMANCE TIMING DBA MICROSEMI CORP - HIGH PERFORMANCE TIMING
CAGE: 00136
MOUNT HOLLY SPRINGS , PA , 17065-1821
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-115-3635
What is the NIIN of the NSN 5915-00-115-3635?
The National Item Identification Number (NIIN) of the NSN 5915-00-115-3635 is 00-115-3635
When the NSN 5915-00-115-3635 was assigned to the Federal Catalog?
It was assigned 56 years ago, on Mon, Sep 16, 1968
Does the NSN 5915-00-115-3635 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-115-3635 contain any hazardous material?
No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

At Aerospace Shop, we are dedicated to providing high-quality aerospace components, shop supplies, replacement parts, and tools.

With a commitment to excellence and customer satisfaction, we aim to be your trusted partner in the aerospace industry.

Contact
800 Town and Country Blvd
Houston, TX, 77024
United States
© 2024 Aerospace Shop, Inc. All rights reserved.
Made in USA