Band Pass Filter
TSA200-18-4SS
(NSN) National Stock Number
5915-00-128-2892
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00209
Schedule B Code
8527995030
Summary
+5.0 to 33.0 vibration resistance range in hertz, +0.0 to 55.0 deg celsius operating temp range, 200.0 megahertz blank reference frequency per function, 50.0 ohms blank source impedance rating per function, 50.0 ohms blank load impedance per function, 16179 input terminal manufacturer code
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KE |
Identification
An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes:a single inductance, or a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00209 | A047B0 | 3 | 1 |
Specifications
Vibration Resistance Range In Hertz
+5.0 to 33.0
Details
The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.Operating Temp Range
+0.0 to 55.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Reference Frequency Per Function
200.0 megahertz blank
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Source Impedance Rating Per Function
50.0 ohms blank
Details
The total opposition per function,presented by a source of energy to the input terminals of an item.Load Impedance Per Function
50.0 ohms blank
Details
The total opposition per function,presented by a load to the output terminals of an item.Input Terminal Manufacturer Code
16179
Details
The identifying numeric code of the originator that controls or manufactures the input terminal.Input Terminal Identification
0sm244&2
Details
The specification,standard,or manufacturers identification number or symbol used to identify the input terminal.Output Terminal Manufacturer Code
16179
Details
The identifying numeric code of the originator that controls or manufactures the output terminal.Output Terminal Identification
0sm244&2
Details
The specification,standard,or manufacturers identification number or symbol used to identify the output terminal.Voltage Standing Wave Ratio Per Function
1.5 blank
Details
The ratio of the maximum to the minimum voltage of the standing wave per function. the larger relative portion is given,the lower value having an implied /not given/ value of one /unity/.Inclosure Type
encased
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Insertion Loss At Reference Frequency Per Function In Decibels
3.0 blank
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Functional Terminal Type And Quantity
1 connector, receptacle input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 connector, receptacle output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Specified Frequencies Of Discrimination Per Function
172.50 megahertz blank and 191.00 megahertz blank and 209.00 megahertz blank and 227.50 megahertz blank
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Frequency Band Width Per Function
191.00 megahertz blank and 209.00 megahertz blank
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Discrimination At Specified Frequencies Per Function In Decibels
30.0 nominal blank and 3.0 nominal blank 1st function
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 404062-1 | 00752 | 1 | - | 1 | 2 | - | KE |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58500 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
TELONIC BERKELEY, INC. DBA TELONIC BERKELEY
CAGE: 04423
VISTA
, CA
, 92081-7874
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-128-2892
What is the NIIN of the NSN 5915-00-128-2892?
The National Item Identification Number (NIIN) of the NSN 5915-00-128-2892 is 00-128-2892
When the NSN 5915-00-128-2892 was assigned to the Federal Catalog?
It was assigned 51 years ago, on Fri, Jan 12, 1973
Does the NSN 5915-00-128-2892 contain any precious metals?
Does not contain precious metal
Does the NSN 5915-00-128-2892 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products