Band Pass Filter

2B247

(NSN) National Stock Number

5915-00-132-4379

Federal Supply Classification

5915 Filters and Networks

Item Name Code

00209

Schedule B Code

8527995030

Summary

3.250 inches nominal overall length, 2.812 inches maximum body length, 1.031 inches maximum body width, 1.000 inches nominal body height, 2.375 inches nominal distance between centerlines of mounting facilities parallel to body length, +5.0 to 500.0 vibration resistance range in hertz

DAC	HCC	DMIL	RNCC
5	-	-	5

RNVC	SADC	MSDS	RNAAC
2	-	-	ZZ

Identification

An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes:a single inductance, or a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).

INC	FIIG	Concept	Condition
00209	A047B0	3	1

Specifications

Overall Length

3.250 inches nominal

Details

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

Body Length

2.812 inches maximum

Details

A measurement of the longest dimension of the body,in distinction from width.

Body Width

1.031 inches maximum

Details

A measurement taken at right angles to the length of the body,in distinction from thickness.

Body Height

1.000 inches nominal

Details

A measurement from the bottom to the top of the body,in distinction from depth.

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

2.375 inches nominal

Details

The distance between centerlines of mounting facilities parallel to the length of the item.

Vibration Resistance Range In Hertz

+5.0 to 500.0

Details

The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.625 inches nominal

Details

The distance between centerlines of mounting facilities parallel to the width of the item.

Operating Temp Range

-10.0 to 75.0 deg celsius

Details

The minimum and maximum limits of temperature at which the item is rated for operation.

Reference Frequency Per Function

307.5 kilohertz blank

Details

The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.

Input Impedance Per Function W/Load

1.0 kilohms blank

Details

The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).

Output Impedance Per Function W/Source Across Input

1.0 kilohms blank

Details

The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).

Principal Circuitry Type Per Function

crystal blank

Details

Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.

Mounting Facility Screw Thread Series Designator

unc

Details

A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.

Inclosure Type

encased

Details

Indicates the type of inclosure provided to coat,cover,protect,or encase the item.

Mounting Facility Type And Quantity

4 threaded hole

Details

Indicates the type and number of facilities by which the item is mounted.

Insertion Loss At Reference Frequency Per Function In Decibels

4.0 blank

Details

The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.

Functional Terminal Type And Quantity

2 wire loop input 1st function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Functional Terminal Type And Quantity

2 wire loop output 2nd function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Maximum Dielectric Withstanding Ac Rms Voltage

100.0 volts at sea level

Details

The maximum alternating current root mean square voltage that the insulating material/s/ of the item will withstand without resulting in disruptive discharge or deterioration.

Specified Frequencies Of Discrimination Per Function

300.00 kilohertz blank and 307.475 kilohertz blank and 307.525 kilohertz blank and 315.00 kilohertz blank

Details

The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.

Nominal Thread Size

0.112 inches

Details

A designation that is used for the purpose of general identification of the thread.

Body Material

metal

Details

The chemical compound or mechanical mixture properties of which the body is fabricated.

Frequency Band Width Per Function

307.475 kilohertz blank and 307.525 kilohertz blank

Details

The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.

Discrimination At Specified Frequencies Per Function In Decibels

60.0 minimum blank and 4.0 maximum blank 1st function

Details

The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.

Style Designator

rectangular terminal/terminals on opposite surfaces

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
CBP208	80294	1	-	5	9	-	TX
293-1177-010	13499	5	-	3	2	-	ZZ
526-7859-010	13499	1	-	5	9	-	TX
293-1177-010	56662	5	-	5	2	-	ZZ

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
P	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
58500	-	P	-

RVC	WCC	TCC	SHC
-	593	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

MICROSEMI CORP. - HIGH PERFORMANCE TIMING DBA MICROSEMI CORP - HIGH PERFORMANCE TIMING

CAGE: 00136

MOUNT HOLLY SPRINGS , PA , 17065-1821

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5915-00-132-4379

What is the NIIN of the NSN 5915-00-132-4379?

The National Item Identification Number (NIIN) of the NSN 5915-00-132-4379 is 00-132-4379

When the NSN 5915-00-132-4379 was assigned to the Federal Catalog?

It was assigned 56 years ago, on Mon, Dec 16, 1968

Does the NSN 5915-00-132-4379 contain any precious metals?

Type/content is unknown

Does the NSN 5915-00-132-4379 contain any hazardous material?

No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.