Low Pass Filter
SG10392-1-1
(NSN) National Stock Number
5915-00-147-9806
Federal Supply Classification
5915 Filters and Networks
Item Name Code
13911
Schedule B Code
8527995030
Summary
4.500 inches nominal overall length, 3.500 inches nominal body length, 1.250 inches nominal body width, 0.500 inches nominal body height, 2.813 inches nominal distance between centerlines of mounting facilities parallel to body length, +10.0 to 2000.0 vibration resistance range in hertz
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
An item designed to pass all frequencies below a specified frequency. Excludes:a single inductance, a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13911 | A047B0 | 3 | 1 |
Specifications
Overall Length
4.500 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Length
3.500 inches nominal
Details
A measurement of the longest dimension of the body,in distinction from width.Body Width
1.250 inches nominal
Details
A measurement taken at right angles to the length of the body,in distinction from thickness.Body Height
0.500 inches nominal
Details
A measurement from the bottom to the top of the body,in distinction from depth.Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
2.813 inches nominal
Details
The distance between centerlines of mounting facilities parallel to the length of the item.Vibration Resistance Range In Hertz
+10.0 to 2000.0
Details
The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
0.950 inches nominal
Details
The distance between centerlines of mounting facilities parallel to the width of the item.Operating Temp Range
-55.0 to 90.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Reference Frequency Per Function
1.03 gigahertz blank
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Source Impedance Rating Per Function
50.0 ohms blank
Details
The total opposition per function,presented by a source of energy to the input terminals of an item.Load Impedance Per Function
50.0 ohms blank
Details
The total opposition per function,presented by a load to the output terminals of an item.Input Terminal Manufacturer Code
81349
Details
The identifying numeric code of the originator that controls or manufactures the input terminal.Input Terminal Identification
sma
Details
The specification,standard,or manufacturers identification number or symbol used to identify the input terminal.Output Terminal Manufacturer Code
81349
Details
The identifying numeric code of the originator that controls or manufactures the output terminal.Output Terminal Identification
sma
Details
The specification,standard,or manufacturers identification number or symbol used to identify the output terminal.Voltage Standing Wave Ratio Per Function
1.5 blank
Details
The ratio of the maximum to the minimum voltage of the standing wave per function. the larger relative portion is given,the lower value having an implied /not given/ value of one /unity/.Average Power Rating Per Function
50.0 watts blank
Details
The value of the average amount of electrical energy per function,which the item may pass or dissipate in continuous operation without degradation of physical or electrical characteristics.Mounting Facility Screw Thread Series Designator
unc
Details
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.Inclosure Type
encased
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
4 threaded hole
Details
Indicates the type and number of facilities by which the item is mounted.Insertion Loss At Reference Frequency Per Function In Decibels
0.5 blank
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Functional Terminal Type And Quantity
1 connector, receptacle input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 connector, receptacle output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Specified Frequencies Of Discrimination Per Function
1.01 gigahertz blank and 1.05 gigahertz blank and 2.06 gigahertz blank and 3.09 gigahertz blank
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Nominal Thread Size
0.112 inches
Details
A designation that is used for the purpose of general identification of the thread.Frequency Band Width Per Function
1.01 gigahertz blank and 1.05 gigahertz blank
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Discrimination At Specified Frequencies Per Function In Decibels
1.0 maximum blank and 75.0 minimum blank 1st function
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Voltage Standing Wave Ratio Frequency Limits Per Function
1.01 gigahertz blank and 1.05 gigahertz blank
Details
The minimum and maximum values of frequency,per function,between which the voltage standing wave ratio is specified.Style Designator
rectangular terminal/terminals on opposite surfaces
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| SG10392-1-1 | 00929 | 5 | - | 5 | 9 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34450 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 658 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
HERLEY CHICAGO DBA STEWART WARNER ELECTRONICS
CAGE: 98738
DES PLAINES
, IL
, 60018-4514
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-147-9806
What is the NIIN of the NSN 5915-00-147-9806?
The National Item Identification Number (NIIN) of the NSN 5915-00-147-9806 is 00-147-9806
When the NSN 5915-00-147-9806 was assigned to the Federal Catalog?
It was assigned 53 years ago, on Wed, Oct 6, 1971
Does the NSN 5915-00-147-9806 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-147-9806 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products