High Pass Filter

HD60N

HD60N
(NSN) National Stock Number
5915-00-151-4608
Federal Supply Classification
5915 Filters and Networks
Item Name Code
13910
Schedule B Code
8527995030
Summary

4.000 inches nominal overall length, 0.375 inches nominal body outside diameter, +10.0 to 55.0 vibration resistance range in hertz, -55.0 to 85.0 deg celsius operating temp range, 9.0 gigahertz blank reference frequency per function, 50.0 ohms blank source impedance rating per function

DAC HCC DMIL RNCC
3 - - 5
RNVC SADC MSDS RNAAC
2 - - TX
Identification

An item designed to pass all frequencies above a specified frequency. Excludes:a single inductance, a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).

INC FIIG Concept Condition
13910 A047B0 3 1
Specifications
Overall Length
4.000 inches nominal
Details The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
Body Outside Diameter
0.375 inches nominal
Details The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
Vibration Resistance Range In Hertz
+10.0 to 55.0
Details The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.
Operating Temp Range
-55.0 to 85.0 deg celsius
Details The minimum and maximum limits of temperature at which the item is rated for operation.
Reference Frequency Per Function
9.0 gigahertz blank
Details The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.
Source Impedance Rating Per Function
50.0 ohms blank
Details The total opposition per function,presented by a source of energy to the input terminals of an item.
Load Impedance Per Function
50.0 ohms blank
Details The total opposition per function,presented by a load to the output terminals of an item.
Input Terminal Manufacturer Code
00929
Details The identifying numeric code of the originator that controls or manufactures the input terminal.
Input Terminal Identification
n-male
Details The specification,standard,or manufacturers identification number or symbol used to identify the input terminal.
Output Terminal Manufacturer Code
00929
Details The identifying numeric code of the originator that controls or manufactures the output terminal.
Output Terminal Identification
n-female
Details The specification,standard,or manufacturers identification number or symbol used to identify the output terminal.
Voltage Standing Wave Ratio Per Function
1.6 blank
Details The ratio of the maximum to the minimum voltage of the standing wave per function. the larger relative portion is given,the lower value having an implied /not given/ value of one /unity/.
Inclosure Type
encased
Details Indicates the type of inclosure provided to coat,cover,protect,or encase the item.
Mounting Facility Type And Quantity
2 terminal
Details Indicates the type and number of facilities by which the item is mounted.
Insertion Loss At Reference Frequency Per Function In Decibels
0.7 blank
Details The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.
Functional Terminal Type And Quantity
1 connector, plug input 1st function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Functional Terminal Type And Quantity
1 connector, receptacle output 2nd function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Specified Frequencies Of Discrimination Per Function
3.00 gigahertz blank and 4.80 gigahertz blank and 6.00 gigahertz blank and 12.00 gigahertz blank
Details The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.
Body Material
metal
Details The chemical compound or mechanical mixture properties of which the body is fabricated.
Frequency Band Width Per Function
6.00 gigahertz blank and 12.00 gigahertz blank
Details The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.
Discrimination At Specified Frequencies Per Function In Decibels
60.0 minimum blank and 25.0 minimum blank and 0.7 maximum blank 1st function
Details The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.
Style Designator
round terminal/terminals on opposite surfaces
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
2189904-1 49671 1 - 3 9 - TX
EMC0F530S 64537 5 - 5 9 - TX
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
P U - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
21275 - W -
RVC WCC TCC SHC
- 72D Z 9

What's Included?

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • Friendly service to back every order
Manufacturer
MICROLAB/FXR LLC
CAGE: 00929
PARSIPPANY , NJ , 07054-3702
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-151-4608
What is the NIIN of the NSN 5915-00-151-4608?
The National Item Identification Number (NIIN) of the NSN 5915-00-151-4608 is 00-151-4608
When the NSN 5915-00-151-4608 was assigned to the Federal Catalog?
It was assigned 53 years ago, on Sun, Oct 10, 1971
Does the NSN 5915-00-151-4608 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-151-4608 contain any hazardous material?
No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

At Aerospace Shop, we are dedicated to providing high-quality aerospace components, shop supplies, replacement parts, and tools.

With a commitment to excellence and customer satisfaction, we aim to be your trusted partner in the aerospace industry.

Contact
800 Town and Country Blvd
Houston, TX, 77024
United States
© 2024 Aerospace Shop, Inc. All rights reserved.
Made in USA