Low Pass Filter
651023ISSUEC
(NSN) National Stock Number
5915-00-240-3812
Federal Supply Classification
5915 Filters and Networks
Item Name Code
13911
Schedule B Code
8527995030
Summary
2.381 inches maximum overall height, 2.906 inches maximum body length, 1.875 inches maximum body width, 1.938 inches nominal body height, 0.193 inches nominal unthreaded mounting hole diameter, 1.156 inches nominal distance between centerlines of mounting facilities parallel to body width
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| X | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | XX |
Identification
An item designed to pass all frequencies below a specified frequency. Excludes:a single inductance, a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13911 | A047B0 | 3 | 1 |
Specifications
Overall Height
2.381 inches maximum
Details
The distance measured in a straight line from the bottom to the top of an item.Body Length
2.906 inches maximum
Details
A measurement of the longest dimension of the body,in distinction from width.Body Width
1.875 inches maximum
Details
A measurement taken at right angles to the length of the body,in distinction from thickness.Body Height
1.938 inches nominal
Details
A measurement from the bottom to the top of the body,in distinction from depth.Unthreaded Mounting Hole Diameter
0.193 inches nominal
Details
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
1.156 inches nominal
Details
The distance between centerlines of mounting facilities parallel to the width of the item.Reference Frequency Per Function
750.0 hertz blank
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Source Impedance Rating Per Function
10.0 kilohms blank
Details
The total opposition per function,presented by a source of energy to the input terminals of an item.Output Impedance Per Function W/Source Across Input
10.0 kilohms blank
Details
The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).Mounting Facility Screw Thread Series Designator
unef
Details
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.Inclosure Type
encased
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
4 unthreaded hole
Details
Indicates the type and number of facilities by which the item is mounted.Insertion Loss At Reference Frequency Per Function In Decibels
3.0 blank
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Functional Terminal Type And Quantity
1 threaded stud ground 3rd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 threaded stud input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 threaded stud output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Specified Frequencies Of Discrimination Per Function
500.00 hertz blank and 1.00 kilohertz blank and 2.00 kilohertz blank and 10.00 kilohertz blank
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Nominal Thread Size
0.250 inches
Details
A designation that is used for the purpose of general identification of the thread.Frequency Band Width Per Function
500.00 hertz blank and 1.00 kilohertz blank
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Discrimination At Specified Frequencies Per Function In Decibels
1.0 maximum blank and 40.0 minimum blank 1st function
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Style Designator
rectangular terminal/terminals on one surface
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| T49415 | 96256 | X | - | 3 | 2 | - | XX |
| T49415 | 80220 | X | - | 5 | 9 | - | XX |
| 651023 | 56232 | X | - | 5 | 2 | - | XX |
| 651023ISSC | 56232 | X | - | 5 | 2 | - | XX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 21275 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
LOCKHEED MARTIN CORP DIV RMS - MITCHEL FIELD
CAGE: 56232
UNIONDALE
, NY
, 11553-3682
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-240-3812
What is the NIIN of the NSN 5915-00-240-3812?
The National Item Identification Number (NIIN) of the NSN 5915-00-240-3812 is 00-240-3812
When the NSN 5915-00-240-3812 was assigned to the Federal Catalog?
It was assigned 65 years ago, on Fri, Jan 1, 1960
Does the NSN 5915-00-240-3812 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-240-3812 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products