Band Pass Filter
TIF3005-300-8SS1
(NSN) National Stock Number
5915-00-294-4951
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00209
Schedule B Code
8527995030
Summary
5.840 inches nominal overall length, 0.620 inches nominal overall height, 2.372 inches nominal overall width, 0.085 inches nominal mounting slot width, 5.088 inches nominal body length, 1.620 inches nominal body width
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | HH |
Identification
An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes:a single inductance, or a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00209 | A047B0 | 3 | 1 |
Specifications
Overall Length
5.840 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Overall Height
0.620 inches nominal
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Width
2.372 inches nominal
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Mounting Slot Width
0.085 inches nominal
Details
A measurement taken at right angles to the length of the mounting slot,in distinction from thickness.Body Length
5.088 inches nominal
Details
A measurement of the longest dimension of the body,in distinction from width.Body Width
1.620 inches nominal
Details
A measurement taken at right angles to the length of the body,in distinction from thickness.Operating Temp Range
+0.0 to 50.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Reference Frequency Per Function
3.005 megahertz 2nd band pass 2nd function
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Reference Frequency Per Function
3.005 megahertz 1st band pass 1st function
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Source Impedance Rating Per Function
50.0 ohms 1st band pass 1st function
Details
The total opposition per function,presented by a source of energy to the input terminals of an item.Source Impedance Rating Per Function
50.0 ohms 2nd band pass 2nd function
Details
The total opposition per function,presented by a source of energy to the input terminals of an item.Load Impedance Per Function
50.0 ohms 1st band pass 1st function
Details
The total opposition per function,presented by a load to the output terminals of an item.Load Impedance Per Function
50.0 ohms 2nd band pass 2nd function
Details
The total opposition per function,presented by a load to the output terminals of an item.Principal Circuitry Type Per Function
inductance-capacitance 1st band pass 1st function
Details
Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.Principal Circuitry Type Per Function
inductance-capacitance 2nd band pass 2nd function
Details
Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.Voltage Standing Wave Ratio Per Function
1.5 1st band pass 1st function
Details
The ratio of the maximum to the minimum voltage of the standing wave per function. the larger relative portion is given,the lower value having an implied /not given/ value of one /unity/.Voltage Standing Wave Ratio Per Function
1.5 2nd band pass 2nd function
Details
The ratio of the maximum to the minimum voltage of the standing wave per function. the larger relative portion is given,the lower value having an implied /not given/ value of one /unity/.Average Power Rating Per Function
20.0 watts 1st band pass 1st function
Details
The value of the average amount of electrical energy per function,which the item may pass or dissipate in continuous operation without degradation of physical or electrical characteristics.Average Power Rating Per Function
20.0 watts 2nd band pass 2nd function
Details
The value of the average amount of electrical energy per function,which the item may pass or dissipate in continuous operation without degradation of physical or electrical characteristics.Inclosure Type
hermetically sealed
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
2 slot
Details
Indicates the type and number of facilities by which the item is mounted.Insertion Loss At Reference Frequency Per Function In Decibels
1.5 2nd band pass 2nd function
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Insertion Loss At Reference Frequency Per Function In Decibels
1.5 1st band pass 1st function
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Functional Terminal Type And Quantity
1 connector, receptacle input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
2 connector, receptacle output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Specified Frequencies Of Discrimination Per Function
2.65 megahertz 1st band pass and 2.905 megahertz 1st band pass and 3.105 megahertz 1st band pass and 3.45 megahertz 1st band pass 1st function
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Specified Frequencies Of Discrimination Per Function
2.65 megahertz 2nd band pass and 2.905 megahertz 2nd band pass and 3.105 megahertz 2nd band pass and 3.45 megahertz 2nd band pass 2nd function
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Body Material
metal
Details
The chemical compound or mechanical mixture properties of which the body is fabricated.Frequency Band Width Per Function
2.905 megahertz 2nd band pass and 3.105 megahertz 2nd band pass 2nd function
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Frequency Band Width Per Function
2.905 megahertz 1st band pass and 3.105 megahertz 1st band pass 1st function
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Discrimination At Specified Frequencies Per Function In Decibels
3.0 minimum 1st band pass and 60.0 maximum 1st band pass 1st function
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Discrimination At Specified Frequencies Per Function In Decibels
3.0 minimum 2nd band pass and 60.0 maximum 2nd band pass 2nd function
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Voltage Standing Wave Ratio Frequency Limits Per Function
2.905 megahertz 1st band pass and 2.844 megahertz 1st band pass 1st function
Details
The minimum and maximum values of frequency,per function,between which the voltage standing wave ratio is specified.Voltage Standing Wave Ratio Frequency Limits Per Function
2.905 megahertz 2nd band pass and 2.844 megahertz 2nd band pass 2nd function
Details
The minimum and maximum values of frequency,per function,between which the voltage standing wave ratio is specified.Special Features
unpackaged unit weight: lb1.000
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Style Designator
rectangular terminal/terminals on opposite surfaces
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 713839-003 | 05869 | 1 | - | 7 | 2 | - | HH |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58500 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
TELONIC BERKELEY, INC. DBA TELONIC BERKELEY
CAGE: 04423
VISTA
, CA
, 92081-7874
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-294-4951
What is the NIIN of the NSN 5915-00-294-4951?
The National Item Identification Number (NIIN) of the NSN 5915-00-294-4951 is 00-294-4951
When the NSN 5915-00-294-4951 was assigned to the Federal Catalog?
It was assigned 51 years ago, on Sat, Sep 22, 1973
Does the NSN 5915-00-294-4951 contain any precious metals?
Does not contain precious metal
Does the NSN 5915-00-294-4951 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products