Low Pass Filter
7536296P1
3.380 inches nominal overall length, 0.500 inches nominal body outside diameter, +5.0 to 2000.0 vibration resistance range in hertz, -55.0 to 85.0 deg celsius operating temp range, 3000.0 average life rating in hours, 425.0 megahertz blank reference frequency per function
DAC | HCC | DMIL | RNCC |
---|---|---|---|
1 | - | - | 5 |
RNVC | SADC | MSDS | RNAAC |
---|---|---|---|
9 | - | - | TX |
An item designed to pass all frequencies below a specified frequency. Excludes:a single inductance, a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
INC | FIIG | Concept | Condition |
---|---|---|---|
13911 | A047B0 | 3 | 1 |
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Details
The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.Details
The minimum and maximum limits of temperature at which the item is rated for operation.Details
The numeric value indicating the average life expectancy for which the item is rated,expressed in hours.Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Details
The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).Details
The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).Details
Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.Details
The identifying numeric code of the originator that controls or manufactures the input terminal.Details
The specification,standard,or manufacturers identification number or symbol used to identify the input terminal.Details
The identifying numeric code of the originator that controls or manufactures the output terminal.Details
The specification,standard,or manufacturers identification number or symbol used to identify the output terminal.Details
The ratio of the maximum to the minimum voltage of the standing wave per function. the larger relative portion is given,the lower value having an implied /not given/ value of one /unity/.Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Details
Indicates the type and number of facilities by which the item is mounted.Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Details
Indicates the functional type and number of terminals providing electrical connection to the item.Details
Indicates the functional type and number of terminals providing electrical connection to the item.Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
---|---|---|---|---|---|---|---|
TLP500-2EE2 | 04423 | 5 | - | 5 | 2 | - | TX |
7536296P0001 | 99971 | 5 | - | 3 | 9 | - | ZZ |
HMIC | PMIC | ESD/EMI | Criticality |
---|---|---|---|
P | U | - | - |
UFC | HMC | LTL | LCL |
---|---|---|---|
21275 | - | W | - |
RVC | WCC | TCC | SHC |
---|---|---|---|
- | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
What is the NIIN of the NSN 5915-00-325-8747?
When the NSN 5915-00-325-8747 was assigned to the Federal Catalog?
Does the NSN 5915-00-325-8747 contain any precious metals?
Does the NSN 5915-00-325-8747 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.