Radio Frequency Interfere Filter
9001-700-1010
(NSN) National Stock Number
5915-00-430-2582
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00765
Schedule B Code
8527995030
Summary
1.138 inches maximum overall length, 0.598 inches maximum body length, 0.375 inches nominal body outside diameter, +10.0 to 2000.0 vibration resistance range in hertz, -55.0 to 125.0 deg celsius operating temp range, 1000.0 average life rating in hours
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | TX |
Identification
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes:items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes:filter, low pass and suppressor, ignition interference. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. See also limiter, electrical noise.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00765 | A047B0 | 3 | 1 |
Specifications
Overall Length
1.138 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Length
0.598 inches maximum
Details
A measurement of the longest dimension of the body,in distinction from width.Body Outside Diameter
0.375 inches nominal
Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Vibration Resistance Range In Hertz
+10.0 to 2000.0
Details
The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.Operating Temp Range
-55.0 to 125.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Average Life Rating In Hours
1000.0
Details
The numeric value indicating the average life expectancy for which the item is rated,expressed in hours.Source Impedance Rating Per Function
50.0 ohms blank
Details
The total opposition per function,presented by a source of energy to the input terminals of an item.Load Impedance Per Function
50.0 ohms blank
Details
The total opposition per function,presented by a load to the output terminals of an item.Operating Current Rating Per Function In Amps
0.5 blank
Details
The level of electrical flow,per function,for which the item is designed to operate,expressed in ampers.Maximum Voltage Drop Per Function
1.5 volts dc blank
Details
The greatest amount of voltage loss per function,resulting from the devices inherent opposition to the flow of electrical current.Principal Circuitry Type Per Function
inductance-capacitance blank
Details
Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.Maximum Temp Rise
25.0 deg celsius
Details
The maximum permissible temperature increase in the item as a result of its operation under normal conditions.Full Load Insertion Loss Frequencies In Megahertz
0.03 and 0.15 and 0.3 and 1.0 and 10.0 and 1000.0
Details
The specified points in the frequency spectrum at which insertion losses (as a function of frequency) under full load are measured,expressed in megahertz.Full Load Minimum Insertion Loss At Specified Frequency In Decibels
15.0 and 50.0 and 68.0 and 82.082.0 and 82.0
Details
The least permissible values for attenuation of spurious or unwanted signals at designated points in the frequency spectrum,expressed in decibels.Mounting Facility Screw Thread Series Designator
unf
Details
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.Inclosure Type
hermetically sealed
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
1 threaded bushing 3rd function
Details
Indicates the type and number of facilities by which the item is mounted.Features Provided
nut and washer
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Functional Terminal Type And Quantity
1 tab, solder lug input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 tab, solder lug output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Operating Voltage Rating And Type Per Function
150.0 volts dc blank
Details
The level of electrical potential and type of current,per function,for which the item is designed.Nominal Thread Size
0.250 inches
Details
A designation that is used for the purpose of general identification of the thread.Body Material
metal
Details
The chemical compound or mechanical mixture properties of which the body is fabricated.Maximum Dielectric Withstanding Dc Voltage
200.0 volts at sea level
Details
The maximum direct current voltage that the insulating material/s/ of the item will withstand without resulting in disruptive discharge or deterioration.Body Surface Treatment
tin
Details
The metallic,nonmetallic,and/or chemical properties with which the body is plated,dipped and/or coated. the treatment is designed to protect the body surface/s/ and cannot be wiped off.Unpackaged Unit Weight
8.500 grams nominal
Details
The measured weight of an item unencumered by packaging or packing material.Style Designator
round terminal/terminals on opposite surfaces
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 9001-516-1010B | 12294 | 5 | - | 5 | 9 | - | ZZ |
| 930426-7B | 82577 | 1 | - | 7 | 2 | - | TX |
| D476 | 50056 | 5 | - | 5 | 9 | - | TX |
| 9001-516-1010B | 0LSP2 | 5 | - | 3 | 2 | - | ZZ |
| D476 | 51642 | 5 | - | 5 | 9 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58500 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 5915-00-430-2582
What is the NIIN of the NSN 5915-00-430-2582?
The National Item Identification Number (NIIN) of the NSN 5915-00-430-2582 is 00-430-2582
When the NSN 5915-00-430-2582 was assigned to the Federal Catalog?
It was assigned 50 years ago, on Wed, May 8, 1974
Does the NSN 5915-00-430-2582 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-430-2582 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products