Low Pass Filter

7000716

(NSN) National Stock Number

5915-00-434-1143

Federal Supply Classification

5915 Filters and Networks

Item Name Code

13911

Schedule B Code

8527995030

Summary

0.690 inches nominal overall height, 0.750 inches nominal body length, 0.750 inches nominal body width, 0.440 inches nominal body height, +5.0 to 2000.0 vibration resistance range in hertz, -55.0 to 125.0 deg celsius operating temp range

DAC	HCC	DMIL	RNCC
2	-	-	1

RNVC	SADC	MSDS	RNAAC
2	-	-	SB

Identification

An item designed to pass all frequencies below a specified frequency. Excludes:a single inductance, a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).

INC	FIIG	Concept	Condition
13911	A047B0	3	1

Specifications

Overall Height

0.690 inches nominal

Details

The distance measured in a straight line from the bottom to the top of an item.

Body Length

0.750 inches nominal

Details

A measurement of the longest dimension of the body,in distinction from width.

Body Width

0.750 inches nominal

Details

A measurement taken at right angles to the length of the body,in distinction from thickness.

Body Height

0.440 inches nominal

Details

A measurement from the bottom to the top of the body,in distinction from depth.

Vibration Resistance Range In Hertz

+5.0 to 2000.0

Details

The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.

Operating Temp Range

-55.0 to 125.0 deg celsius

Details

The minimum and maximum limits of temperature at which the item is rated for operation.

Average Life Rating In Hours

10000.0

Details

The numeric value indicating the average life expectancy for which the item is rated,expressed in hours.

Reference Frequency Per Function

1.0 megahertz blank

Details

The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.

Source Impedance Rating Per Function

200.0 ohms blank

Details

The total opposition per function,presented by a source of energy to the input terminals of an item.

Load Impedance Per Function

200.0 ohms blank

Details

The total opposition per function,presented by a load to the output terminals of an item.

Principal Circuitry Type Per Function

inductance-capacitance blank

Details

Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.

Inclosure Type

encapsulated

Details

Indicates the type of inclosure provided to coat,cover,protect,or encase the item.

Mounting Facility Type And Quantity

3 terminal

Details

Indicates the type and number of facilities by which the item is mounted.

Insertion Loss At Reference Frequency Per Function In Decibels

0.5 blank

Details

The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.

Functional Terminal Type And Quantity

1 pin input 1st function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Functional Terminal Type And Quantity

1 pin ground 3rd function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Functional Terminal Type And Quantity

1 pin output 2nd function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Specified Frequencies Of Discrimination Per Function

500.00 kilohertz blank and 1.50 megahertz blank and 2.50 megahertz blank and 5.00 megahertz blank

Details

The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.

Frequency Band Width Per Function

500.00 kilohertz blank and 1.50 megahertz blank

Details

The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.

Discrimination At Specified Frequencies Per Function In Decibels

0.5 maximum blank and 14.0 minimum blank 1st function

Details

The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.

Style Designator

rectangular terminal/terminals on one surface

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
20-0551-00	11402	4	-	3	2	-	ZZ
LPF20-0551-00	11402	4	-	5	9	-	SB

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
P	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
21275	-	W	-

RVC	WCC	TCC	SHC
-	72D	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

GE AVIATION SYSTEMS LLC DBA GE AVIATION

CAGE: 93322

GRAND RAPIDS , MI , 49512-1934

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5915-00-434-1143

What is the NIIN of the NSN 5915-00-434-1143?

The National Item Identification Number (NIIN) of the NSN 5915-00-434-1143 is 00-434-1143

When the NSN 5915-00-434-1143 was assigned to the Federal Catalog?

It was assigned 50 years ago, on Fri, May 17, 1974

Does the NSN 5915-00-434-1143 contain any precious metals?

Type/content is unknown

Does the NSN 5915-00-434-1143 contain any hazardous material?

No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.