Band Pass Filter

TBC30-1-5SS1

TBC30-1-5SS1
(NSN) National Stock Number
5915-00-500-9877
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00209
Schedule B Code
8527995030
Summary

6.000 inches nominal overall length, 1.250 inches nominal body outside diameter, +0.0 to 50.0 deg celsius operating temp range, 30.0 megahertz blank reference frequency per function, 50.0 ohms blank load impedance per function, 50.0 ohms blank input impedance per function w/load

DAC HCC DMIL RNCC
3 - - 3
RNVC SADC MSDS RNAAC
2 - - TX
Identification

An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes:a single inductance, or a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).

INC FIIG Concept Condition
00209 A047B0 3 1
Specifications
Overall Length
6.000 inches nominal
Details The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
Body Outside Diameter
1.250 inches nominal
Details The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
Operating Temp Range
+0.0 to 50.0 deg celsius
Details The minimum and maximum limits of temperature at which the item is rated for operation.
Reference Frequency Per Function
30.0 megahertz blank
Details The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.
Load Impedance Per Function
50.0 ohms blank
Details The total opposition per function,presented by a load to the output terminals of an item.
Input Impedance Per Function W/Load
50.0 ohms blank
Details The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).
Output Impedance Per Function W/Source Across Input
50.0 ohms blank
Details The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).
Principal Circuitry Type Per Function
electromechanical blank
Details Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.
Input Terminal Manufacturer Code
04423
Details The identifying numeric code of the originator that controls or manufactures the input terminal.
Input Terminal Identification
32367
Details The specification,standard,or manufacturers identification number or symbol used to identify the input terminal.
Output Terminal Manufacturer Code
04423
Details The identifying numeric code of the originator that controls or manufactures the output terminal.
Output Terminal Identification
32367
Details The specification,standard,or manufacturers identification number or symbol used to identify the output terminal.
Voltage Standing Wave Ratio Per Function
1.5 blank
Details The ratio of the maximum to the minimum voltage of the standing wave per function. the larger relative portion is given,the lower value having an implied /not given/ value of one /unity/.
Inclosure Type
encased
Details Indicates the type of inclosure provided to coat,cover,protect,or encase the item.
Mounting Facility Type And Quantity
2 terminal
Details Indicates the type and number of facilities by which the item is mounted.
Insertion Loss At Reference Frequency Per Function In Decibels
0.1 blank
Details The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.
Functional Terminal Type And Quantity
1 connector, receptacle input 1st function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Functional Terminal Type And Quantity
1 connector, receptacle output 2nd function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Specified Frequencies Of Discrimination Per Function
28.25 megahertz blank and 29.50 megahertz blank and 30.50 megahertz blank and 31.75 megahertz blank
Details The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.
Frequency Band Width Per Function
29.50 megahertz blank and 30.50 megahertz blank
Details The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.
Discrimination At Specified Frequencies Per Function In Decibels
50.0 nominal blank and 3.0 nominal blank and 60.0 nominal blank 1st function
Details The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.
Style Designator
round terminal/terminals on opposite surfaces
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
P U - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
58500 - P -
RVC WCC TCC SHC
- 593 Z 9

What's Included?

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • Friendly service to back every order
Manufacturer
TELONIC BERKELEY, INC. DBA TELONIC BERKELEY
CAGE: 04423
VISTA , CA , 92081-7874
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-500-9877
What is the NIIN of the NSN 5915-00-500-9877?
The National Item Identification Number (NIIN) of the NSN 5915-00-500-9877 is 00-500-9877
When the NSN 5915-00-500-9877 was assigned to the Federal Catalog?
It was assigned 50 years ago, on Sat, Jul 6, 1974
Does the NSN 5915-00-500-9877 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-500-9877 contain any hazardous material?
No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Who we are?

At Aerospace Shop, we are dedicated to providing high-quality aerospace components, shop supplies, replacement parts, and tools.

With a commitment to excellence and customer satisfaction, we aim to be your trusted partner in the aerospace industry.

Contact
800 Town and Country Blvd
Houston, TX, 77024
United States
© 2024 Aerospace Shop, Inc. All rights reserved.
Made in USA