Band Pass Filter

2B198

2B198
(NSN) National Stock Number
5915-00-503-8756
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00209
Schedule B Code
8527995030
Summary

3.042 inches nominal overall length, 2.667 inches nominal body length, 1.141 inches nominal body width, 0.625 inches nominal body height, 0.094 inches nominal unthreaded mounting hole diameter, 2.875 inches nominal distance between centerlines of mounting facilities parallel to body length

DAC HCC DMIL RNCC
1 - - 5
RNVC SADC MSDS RNAAC
2 - - TX
Identification

An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes:a single inductance, or a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).

INC FIIG Concept Condition
00209 A047B0 3 1
Specifications
Overall Length
3.042 inches nominal
Details The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
Body Length
2.667 inches nominal
Details A measurement of the longest dimension of the body,in distinction from width.
Body Width
1.141 inches nominal
Details A measurement taken at right angles to the length of the body,in distinction from thickness.
Body Height
0.625 inches nominal
Details A measurement from the bottom to the top of the body,in distinction from depth.
Unthreaded Mounting Hole Diameter
0.094 inches nominal
Details The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.
Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
2.875 inches nominal
Details The distance between centerlines of mounting facilities parallel to the length of the item.
Vibration Resistance Range In Hertz
+10.0 to 55.0
Details The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.
Operating Temp Range
-55.0 to 95.0 deg celsius
Details The minimum and maximum limits of temperature at which the item is rated for operation.
Reference Frequency Per Function
70.0 megahertz blank
Details The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.
Source Impedance Rating Per Function
50.0 ohms blank
Details The total opposition per function,presented by a source of energy to the input terminals of an item.
Load Impedance Per Function
50.0 ohms blank
Details The total opposition per function,presented by a load to the output terminals of an item.
Principal Circuitry Type Per Function
crystal blank
Details Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.
Inclosure Type
hermetically sealed
Details Indicates the type of inclosure provided to coat,cover,protect,or encase the item.
Mounting Facility Type And Quantity
4 unthreaded hole
Details Indicates the type and number of facilities by which the item is mounted.
Insertion Loss At Reference Frequency Per Function In Decibels
6.0 blank
Details The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.
Functional Terminal Type And Quantity
1 pin input 1st function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Functional Terminal Type And Quantity
1 pin ground 3rd function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Functional Terminal Type And Quantity
2 pin output 2nd function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Specified Frequencies Of Discrimination Per Function
69.955 megahertz blank and 69.981 megahertz blank and 70.019 megahertz blank and 70.045 megahertz blank
Details The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.
Frequency Band Width Per Function
69.981 megahertz blank and 70.019 megahertz blank
Details The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.
Discrimination At Specified Frequencies Per Function In Decibels
60.0 nominal blank and 6.0 nominal blank 1st function
Details The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.
Special Features
switchable to bandwidth of 70khz at 3db and70mhz center frequency
Details Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.
Style Designator
rectangular terminal/terminals on opposite surfaces
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
293-1237-011 13499 1 - 3 2 - TX
23980-001 0S4G1 5 - 5 2 - ZZ
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
P A - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
58500 - P -
RVC WCC TCC SHC
- 593 Z 9

What's Included?

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • Friendly service to back every order
Manufacturer
MICROSEMI CORP. - HIGH PERFORMANCE TIMING DBA MICROSEMI CORP - HIGH PERFORMANCE TIMING
CAGE: 00136
MOUNT HOLLY SPRINGS , PA , 17065-1821
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-503-8756
What is the NIIN of the NSN 5915-00-503-8756?
The National Item Identification Number (NIIN) of the NSN 5915-00-503-8756 is 00-503-8756
When the NSN 5915-00-503-8756 was assigned to the Federal Catalog?
It was assigned 50 years ago, on Sat, Jul 13, 1974
Does the NSN 5915-00-503-8756 contain any precious metals?
Does not contain precious metal
Does the NSN 5915-00-503-8756 contain any hazardous material?
No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

At Aerospace Shop, we are dedicated to providing high-quality aerospace components, shop supplies, replacement parts, and tools.

With a commitment to excellence and customer satisfaction, we aim to be your trusted partner in the aerospace industry.

Contact
800 Town and Country Blvd
Houston, TX, 77024
United States
© 2024 Aerospace Shop, Inc. All rights reserved.
Made in USA