Band Pass Filter
6B340-312-22NB
(NSN) National Stock Number
5915-00-599-9162
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00209
Schedule B Code
8527995030
Summary
6.940 inches nominal overall length, 0.750 inches nominal body outside diameter, +10.0 to 55.0 vibration resistance range in hertz, +0.0 to 70.0 deg celsius operating temp range, 312.0 megahertz blank reference frequency per function, 50.0 ohms blank source impedance rating per function
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes:a single inductance, or a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00209 | A047B0 | 3 | 1 |
Specifications
Overall Length
6.940 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Outside Diameter
0.750 inches nominal
Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Vibration Resistance Range In Hertz
+10.0 to 55.0
Details
The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.Operating Temp Range
+0.0 to 70.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Reference Frequency Per Function
312.0 megahertz blank
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Source Impedance Rating Per Function
50.0 ohms blank
Details
The total opposition per function,presented by a source of energy to the input terminals of an item.Load Impedance Per Function
50.0 ohms blank
Details
The total opposition per function,presented by a load to the output terminals of an item.Input Terminal Manufacturer Code
11882
Details
The identifying numeric code of the originator that controls or manufactures the input terminal.Input Terminal Identification
31223
Details
The specification,standard,or manufacturers identification number or symbol used to identify the input terminal.Output Terminal Manufacturer Code
11882
Details
The identifying numeric code of the originator that controls or manufactures the output terminal.Output Terminal Identification
32333
Details
The specification,standard,or manufacturers identification number or symbol used to identify the output terminal.Voltage Standing Wave Ratio Per Function
1.5 blank
Details
The ratio of the maximum to the minimum voltage of the standing wave per function. the larger relative portion is given,the lower value having an implied /not given/ value of one /unity/.Average Power Rating Per Function
15.0 watts blank
Details
The value of the average amount of electrical energy per function,which the item may pass or dissipate in continuous operation without degradation of physical or electrical characteristics.Inclosure Type
encased
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
1 clamp
Details
Indicates the type and number of facilities by which the item is mounted.Insertion Loss At Reference Frequency Per Function In Decibels
1.8 blank
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Functional Terminal Type And Quantity
1 connector, receptacle input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 connector, receptacle output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Specified Frequencies Of Discrimination Per Function
280.00 megahertz blank and 301.00 megahertz blank and 323.00 megahertz blank and 330.00 megahertz blank
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Frequency Band Width Per Function
301.00 megahertz blank and 323.00 megahertz blank
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Discrimination At Specified Frequencies Per Function In Decibels
20.0 minimum blank and 3.0 maximum blank 1st function
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Voltage Standing Wave Ratio Frequency Limits Per Function
303.0 megahertz blank and 321.0 megahertz blank
Details
The minimum and maximum values of frequency,per function,between which the voltage standing wave ratio is specified.Style Designator
round terminal/terminals on opposite surfaces
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| G300264S5 | 24930 | 1 | - | 3 | 2 | - | TX |
| TBA312-22-6EX1 | 04423 | 5 | - | 5 | 2 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34450 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 5915-00-599-9162
What is the NIIN of the NSN 5915-00-599-9162?
The National Item Identification Number (NIIN) of the NSN 5915-00-599-9162 is 00-599-9162
When the NSN 5915-00-599-9162 was assigned to the Federal Catalog?
It was assigned 49 years ago, on Thu, Jan 16, 1975
Does the NSN 5915-00-599-9162 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-599-9162 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products