Radio Frequency Interfere Filter

117747-003

117747-003
(NSN) National Stock Number
5915-00-689-4554
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00765
Schedule B Code
8527995030
Summary

1.077 inches nominal overall length, 0.540 inches nominal body length, 0.410 inches maximum body outside diameter, +10.0 to 2000.0 vibration resistance range in hertz, -55.0 to 85.0 deg celsius operating temp range, 250.0 average life rating in hours

DAC HCC DMIL RNCC
1 - - 5
RNVC SADC MSDS RNAAC
2 - - TX
Identification

An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes:items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes:filter, low pass and suppressor, ignition interference. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. See also limiter, electrical noise.

INC FIIG Concept Condition
00765 A047B0 3 1
Specifications
Overall Length
1.077 inches nominal
Details The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
Body Length
0.540 inches nominal
Details A measurement of the longest dimension of the body,in distinction from width.
Body Outside Diameter
0.410 inches maximum
Details The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
Vibration Resistance Range In Hertz
+10.0 to 2000.0
Details The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.
Operating Temp Range
-55.0 to 85.0 deg celsius
Details The minimum and maximum limits of temperature at which the item is rated for operation.
Average Life Rating In Hours
250.0
Details The numeric value indicating the average life expectancy for which the item is rated,expressed in hours.
Source Impedance Rating Per Function
50.0 ohms blank
Details The total opposition per function,presented by a source of energy to the input terminals of an item.
Load Impedance Per Function
50.0 ohms blank
Details The total opposition per function,presented by a load to the output terminals of an item.
Operating Current Rating Per Function In Amps
10.0 blank
Details The level of electrical flow,per function,for which the item is designed to operate,expressed in ampers.
Principal Circuitry Type Per Function
inductance-capacitance blank
Details Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.
Mounting Facility Screw Thread Series Designator
unf
Details A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.
Inclosure Type
hermetically sealed
Details Indicates the type of inclosure provided to coat,cover,protect,or encase the item.
Mounting Facility Type And Quantity
1 threaded bushing
Details Indicates the type and number of facilities by which the item is mounted.
Functional Terminal Type And Quantity
1 tab, solder lug input 1st function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Functional Terminal Type And Quantity
1 tab, solder lug output 2nd function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Operating Voltage Rating And Type Per Function
50.0 volts dc blank
Details The level of electrical potential and type of current,per function,for which the item is designed.
Nominal Thread Size
0.250 inches
Details A designation that is used for the purpose of general identification of the thread.
Maximum Dielectric Withstanding Dc Voltage
100.0 volts at sea level
Details The maximum direct current voltage that the insulating material/s/ of the item will withstand without resulting in disruptive discharge or deterioration.
Special Features
schematic diagram indicates inductor at mounting end
Details Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.
Style Designator
round terminal/terminals on opposite surfaces
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
2645514340 F9111 6 - 5 2 - ZF
2020-021 0LSP2 5 - 3 2 - ZZ
2020-007R 33095 5 - 5 9 - TX
2020-021 33095 5 - 5 9 - TX
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
P U - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
34450 - P P
RVC WCC TCC SHC
- 658 Z 9

What's Included?

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • Friendly service to back every order
Manufacturer
L3HARRIS TECHNOLOGIES, INC.
CAGE: 91417
PALM BAY , FL , 32905-3377
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-689-4554
What is the NIIN of the NSN 5915-00-689-4554?
The National Item Identification Number (NIIN) of the NSN 5915-00-689-4554 is 00-689-4554
When the NSN 5915-00-689-4554 was assigned to the Federal Catalog?
It was assigned 53 years ago, on Tue, Feb 16, 1971
Does the NSN 5915-00-689-4554 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-689-4554 contain any hazardous material?
No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

At Aerospace Shop, we are dedicated to providing high-quality aerospace components, shop supplies, replacement parts, and tools.

With a commitment to excellence and customer satisfaction, we aim to be your trusted partner in the aerospace industry.

Contact
800 Town and Country Blvd
Houston, TX, 77024
United States
© 2024 Aerospace Shop, Inc. All rights reserved.
Made in USA