Band Pass Filter
TBA-1060-100-4EF1
(NSN) National Stock Number
5915-00-722-7928
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00209
Schedule B Code
8527995030
Summary
5.594 inches nominal overall length, 0.750 inches nominal body outside diameter, +5.0 to 500.0 vibration resistance range in hertz, -54.0 to 71.0 deg celsius operating temp range, 250.0 average life rating in hours, 1.02 gigahertz 1st band pass 1st function reference frequency per function
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 6 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes:a single inductance, or a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00209 | A047B0 | 3 | 1 |
Specifications
Overall Length
5.594 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Outside Diameter
0.750 inches nominal
Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Vibration Resistance Range In Hertz
+5.0 to 500.0
Details
The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.Operating Temp Range
-54.0 to 71.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Average Life Rating In Hours
250.0
Details
The numeric value indicating the average life expectancy for which the item is rated,expressed in hours.Reference Frequency Per Function
1.02 gigahertz 1st band pass 1st function
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Reference Frequency Per Function
1.10 gigahertz 2nd band pass 2nd function
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Input Impedance Per Function W/Load
50.0 ohms 1st band pass 1st function
Details
The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).Input Impedance Per Function W/Load
50.0 ohms 2nd band pass 2nd function
Details
The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).Output Impedance Per Function W/Source Across Input
50.0 ohms 2nd band pass 2nd function
Details
The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).Output Impedance Per Function W/Source Across Input
50.0 ohms 1st band pass 1st function
Details
The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).Voltage Standing Wave Ratio Per Function
1.5 1st band pass 1st function
Details
The ratio of the maximum to the minimum voltage of the standing wave per function. the larger relative portion is given,the lower value having an implied /not given/ value of one /unity/.Voltage Standing Wave Ratio Per Function
1.5 2nd band pass 2nd function
Details
The ratio of the maximum to the minimum voltage of the standing wave per function. the larger relative portion is given,the lower value having an implied /not given/ value of one /unity/.Average Power Rating Per Function
15.0 watts 1st band pass 1st function
Details
The value of the average amount of electrical energy per function,which the item may pass or dissipate in continuous operation without degradation of physical or electrical characteristics.Average Power Rating Per Function
15.0 watts 2nd band pass 2nd function
Details
The value of the average amount of electrical energy per function,which the item may pass or dissipate in continuous operation without degradation of physical or electrical characteristics.Inclosure Type
encased
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
2 terminal
Details
Indicates the type and number of facilities by which the item is mounted.Insertion Loss At Reference Frequency Per Function In Decibels
0.5 1st band pass 1st function
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Insertion Loss At Reference Frequency Per Function In Decibels
0.5 2nd band pass 2nd function
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Functional Terminal Type And Quantity
1 connector, plug input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 connector, receptacle output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Specified Frequencies Of Discrimination Per Function
340.00 megahertz 1st band pass and 1.01 gigahertz 1st band pass and 1.03 gigahertz 1st band pass and 2.00 gigahertz 1st band pass 1st function
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Specified Frequencies Of Discrimination Per Function
340.00 megahertz 2nd band pass and 1.09 gigahertz 2nd band pass and 1.11 gigahertz 2nd band pass and 2.00 gigahertz 2nd band pass 2nd function
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Frequency Band Width Per Function
1.01 gigahertz 1st band pass and 1.03 gigahertz 1st band pass 1st function
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Frequency Band Width Per Function
1.09 gigahertz 2nd band pass and 1.11 gigahertz 2nd band pass 2nd function
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Discrimination At Specified Frequencies Per Function In Decibels
40.0 minimum 1st band pass and 3.0 maximum 1st band pass 1st function3.0 maximum 1st band pass and 40.0 minimum 1st band pass 1st function
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Discrimination At Specified Frequencies Per Function In Decibels
40.0 minimum 2nd band pass and 3.0 maximum 2nd band pass 2nd function3.0 maximum 2nd band pass and 40.0 minimum 2nd band pass 2nd function
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Voltage Standing Wave Ratio Frequency Limits Per Function
1.01 gigahertz 1st band pass and 1.03 gigahertz 1st band pass 1st function
Details
The minimum and maximum values of frequency,per function,between which the voltage standing wave ratio is specified.Voltage Standing Wave Ratio Frequency Limits Per Function
1.09 gigahertz 2nd band pass and 1.11 gigahertz 2nd band pass 2nd function
Details
The minimum and maximum values of frequency,per function,between which the voltage standing wave ratio is specified.Special Features
unpackaged unit weight: oz8.000
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Style Designator
round terminal/terminals on opposite surfaces
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 132694 | 06481 | 1 | - | 5 | 2 | - | TX |
| F943APX7 | 80058 | 1 | - | 3 | 2 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58500 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
TELONIC BERKELEY, INC. DBA TELONIC BERKELEY
CAGE: 04423
VISTA
, CA
, 92081-7874
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-722-7928
What is the NIIN of the NSN 5915-00-722-7928?
The National Item Identification Number (NIIN) of the NSN 5915-00-722-7928 is 00-722-7928
When the NSN 5915-00-722-7928 was assigned to the Federal Catalog?
It was assigned 63 years ago, on Sun, Jan 1, 1961
Does the NSN 5915-00-722-7928 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-722-7928 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products