Band Pass Filter
X050-2
(NSN) National Stock Number
5915-00-825-9648
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00209
Schedule B Code
8527995030
Summary
3.172 inches minimum and 3.219 inches maximum body length, 1.141 inches nominal body width, 1.141 inches nominal body height, 2.968 inches nominal distance between centerlines of mounting facilities parallel to body length, +5.0 to 500.0 vibration resistance range in hertz, 0.745 inches minimum and 0.755 inches maximum distance between centerlines of mounting facilities parallel to body width
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes:a single inductance, or a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00209 | A047B0 | 3 | 1 |
Specifications
Body Length
3.172 inches minimum and 3.219 inches maximum
Details
A measurement of the longest dimension of the body,in distinction from width.Body Width
1.141 inches nominal
Details
A measurement taken at right angles to the length of the body,in distinction from thickness.Body Height
1.141 inches nominal
Details
A measurement from the bottom to the top of the body,in distinction from depth.Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
2.968 inches nominal
Details
The distance between centerlines of mounting facilities parallel to the length of the item.Vibration Resistance Range In Hertz
+5.0 to 500.0
Details
The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
0.745 inches minimum and 0.755 inches maximum
Details
The distance between centerlines of mounting facilities parallel to the width of the item.Operating Temp Range
-55.0 to 75.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Reference Frequency Per Function
4.6 megahertz blank
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Input Impedance Per Function W/Load
8.0 kilohms blank
Details
The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).Output Impedance Per Function W/Source Across Input
350.0 ohms blank
Details
The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).Input Terminal Manufacturer Code
74868
Details
The identifying numeric code of the originator that controls or manufactures the input terminal.Input Terminal Identification
27-90
Details
The specification,standard,or manufacturers identification number or symbol used to identify the input terminal.Output Terminal Manufacturer Code
74868
Details
The identifying numeric code of the originator that controls or manufactures the output terminal.Output Terminal Identification
27-90
Details
The specification,standard,or manufacturers identification number or symbol used to identify the output terminal.Inclosure Type
hermetically sealed
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Insertion Loss At Reference Frequency Per Function In Decibels
6.0 blank
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Functional Terminal Type And Quantity
1 connector, receptacle input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 connector, receptacle output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Specified Frequencies Of Discrimination Per Function
4.00 megahertz blank and 4.49 megahertz blank and 4.71 megahertz blank and 5.20 megahertz blank
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Frequency Band Width Per Function
4.49 megahertz blank and 4.71 megahertz blank
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Discrimination At Specified Frequencies Per Function In Decibels
60.0 minimum blank and 6.0 maximum blank 1st function
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Style Designator
rectangular terminal/terminals on one surface
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 241-0277-000 | 13499 | 1 | - | 3 | 9 | - | TX |
| 5020 | 82268 | 1 | - | 5 | 9 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58500 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
COMMUNICATION COIL, INC. DIV -
CAGE: 81815
SCHILLER PARK
, IL
, 60176-2104
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-825-9648
What is the NIIN of the NSN 5915-00-825-9648?
The National Item Identification Number (NIIN) of the NSN 5915-00-825-9648 is 00-825-9648
When the NSN 5915-00-825-9648 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5915-00-825-9648 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-825-9648 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products