Band Pass Filter
20-0787-00
(NSN) National Stock Number
5915-00-836-6259
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00209
Schedule B Code
8527995030
Summary
1.500 inches maximum overall height, 0.750 inches maximum body length, 0.750 inches maximum body width, 0.750 inches maximum body height, +10.0 to 55.0 vibration resistance range in hertz, -55.0 to 85.0 deg celsius operating temp range
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes:a single inductance, or a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00209 | A047B0 | 3 | 1 |
Specifications
Overall Height
1.500 inches maximum
Details
The distance measured in a straight line from the bottom to the top of an item.Body Length
0.750 inches maximum
Details
A measurement of the longest dimension of the body,in distinction from width.Body Width
0.750 inches maximum
Details
A measurement taken at right angles to the length of the body,in distinction from thickness.Body Height
0.750 inches maximum
Details
A measurement from the bottom to the top of the body,in distinction from depth.Vibration Resistance Range In Hertz
+10.0 to 55.0
Details
The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.Operating Temp Range
-55.0 to 85.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Reference Frequency Per Function
10.0 kilohertz blank
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Source Impedance Rating Per Function
30.0 kilohms blank
Details
The total opposition per function,presented by a source of energy to the input terminals of an item.Load Impedance Per Function
500.0 ohms blank
Details
The total opposition per function,presented by a load to the output terminals of an item.Input Impedance Per Function W/Load
4.0 kilohms blank
Details
The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).Output Impedance Per Function W/Source Across Input
4.0 kilohms blank
Details
The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).Inclosure Type
encapsulated
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
4 terminal
Details
Indicates the type and number of facilities by which the item is mounted.Insertion Loss At Reference Frequency Per Function In Decibels
2.0 blank
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Functional Terminal Type And Quantity
2 wire lead input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
2 wire lead output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Specified Frequencies Of Discrimination Per Function
30.00 hertz blank and 9.50 kilohertz blank and 10.50 kilohertz blank and 20.00 kilohertz blank
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Body Material
plastic
Details
The chemical compound or mechanical mixture properties of which the body is fabricated.Frequency Band Width Per Function
9.50 kilohertz blank and 10.50 kilohertz blank
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Discrimination At Specified Frequencies Per Function In Decibels
30.0 minimum blank and 1.5 maximum blank and 28.0 minimum blank 1st function
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Maximum Dielectric Withstanding Dc Voltage
100.0 volts at sea level
Details
The maximum direct current voltage that the insulating material/s/ of the item will withstand without resulting in disruptive discharge or deterioration.Style Designator
rectangular terminal/terminals on one surface
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
65597-38912-1 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 038912-0001 | 65597 | 5 | - | C | 1 | - | 48 |
| 38912-00001 | 65597 | 5 | - | 3 | 2 | - | TX |
| 38912-1 | 65597 | 1 | - | 5 | 9 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58500 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 5915-00-836-6259
What is the NIIN of the NSN 5915-00-836-6259?
The National Item Identification Number (NIIN) of the NSN 5915-00-836-6259 is 00-836-6259
When the NSN 5915-00-836-6259 was assigned to the Federal Catalog?
It was assigned 58 years ago, on Fri, Dec 9, 1966
Does the NSN 5915-00-836-6259 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-836-6259 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products