Band Pass Filter
C7742546P1REVD
(NSN) National Stock Number
5915-00-846-0829
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00209
Schedule B Code
8527995030
Summary
3.000 inches nominal overall height, 3.000 inches nominal body length, 2.000 inches nominal body width, 2.250 inches nominal body height, 2.500 inches nominal distance between centerlines of mounting facilities parallel to body length, +10.0 to 55.0 vibration resistance range in hertz
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| X | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | XX |
Identification
An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes:a single inductance, or a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00209 | A047B0 | 3 | 1 |
Specifications
Overall Height
3.000 inches nominal
Details
The distance measured in a straight line from the bottom to the top of an item.Body Length
3.000 inches nominal
Details
A measurement of the longest dimension of the body,in distinction from width.Body Width
2.000 inches nominal
Details
A measurement taken at right angles to the length of the body,in distinction from thickness.Body Height
2.250 inches nominal
Details
A measurement from the bottom to the top of the body,in distinction from depth.Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
2.500 inches nominal
Details
The distance between centerlines of mounting facilities parallel to the length of the item.Vibration Resistance Range In Hertz
+10.0 to 55.0
Details
The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
1.500 inches nominal
Details
The distance between centerlines of mounting facilities parallel to the width of the item.Operating Temp Range
+0.0 to 70.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Average Life Rating In Hours
10000.0
Details
The numeric value indicating the average life expectancy for which the item is rated,expressed in hours.Reference Frequency Per Function
3.495 kilohertz blank
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Source Impedance Rating Per Function
33.0 kilohms blank
Details
The total opposition per function,presented by a source of energy to the input terminals of an item.Load Impedance Per Function
33.0 kilohms blank
Details
The total opposition per function,presented by a load to the output terminals of an item.Input Impedance Per Function W/Load
33.0 kilohms blank
Details
The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).Output Impedance Per Function W/Source Across Input
33.0 kilohms blank
Details
The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).Principal Circuitry Type Per Function
inductance-resistance blank
Details
Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.Mounting Facility Screw Thread Series Designator
unc
Details
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.Inclosure Type
hermetically sealed
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
4 threaded stud
Details
Indicates the type and number of facilities by which the item is mounted.Insertion Loss At Reference Frequency Per Function In Decibels
12.0 blank
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Functional Terminal Type And Quantity
1 tab, solder lug ground 3rd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
2 tab, solder lug input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
2 tab, solder lug output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Maximum Dielectric Withstanding Ac Rms Voltage
500.0 volts at sea level
Details
The maximum alternating current root mean square voltage that the insulating material/s/ of the item will withstand without resulting in disruptive discharge or deterioration.Specified Frequencies Of Discrimination Per Function
1.499 kilohertz blank and 3.295 kilohertz blank and 3.695 kilohertz blank and 5.495 kilohertz blank
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Nominal Thread Size
0.164 inches
Details
A designation that is used for the purpose of general identification of the thread.Frequency Band Width Per Function
3.295 kilohertz blank and 3.695 kilohertz blank
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Discrimination At Specified Frequencies Per Function In Decibels
60.0 minimum blank and 3.0 maximum blank 1st function
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Style Designator
rectangular terminal/terminals on one surface
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 20-0079-00 | 11402 | 5 | - | 5 | 2 | - | HH |
| 7742546P001 | 03538 | 1 | - | 5 | 2 | - | HH |
| C7742546P1REVD | 03538 | X | - | 3 | 2 | - | XX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58500 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 5915-00-846-0829
What is the NIIN of the NSN 5915-00-846-0829?
The National Item Identification Number (NIIN) of the NSN 5915-00-846-0829 is 00-846-0829
When the NSN 5915-00-846-0829 was assigned to the Federal Catalog?
It was assigned 62 years ago, on Mon, Jan 1, 1962
Does the NSN 5915-00-846-0829 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-846-0829 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products