Band Pass Filter

2B215

(NSN) National Stock Number

5915-00-849-8825

Federal Supply Classification

5915 Filters and Networks

Item Name Code

00209

Schedule B Code

8527995030

Summary

1.375 inches nominal overall height, 2.812 inches nominal body length, 0.938 inches maximum body width, 1.000 inches nominal body height, 1.531 inches nominal distance between centerlines of mounting facilities parallel to body length, +10.0 to 500.0 vibration resistance range in hertz

DAC	HCC	DMIL	RNCC
5	-	-	5

RNVC	SADC	MSDS	RNAAC
2	-	-	TX

Identification

An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes:a single inductance, or a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).

INC	FIIG	Concept	Condition
00209	A047B0	3	1

Specifications

Overall Height

1.375 inches nominal

Details

The distance measured in a straight line from the bottom to the top of an item.

Body Length

2.812 inches nominal

Details

A measurement of the longest dimension of the body,in distinction from width.

Body Width

0.938 inches maximum

Details

A measurement taken at right angles to the length of the body,in distinction from thickness.

Body Height

1.000 inches nominal

Details

A measurement from the bottom to the top of the body,in distinction from depth.

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

1.531 inches nominal

Details

The distance between centerlines of mounting facilities parallel to the length of the item.

Vibration Resistance Range In Hertz

+10.0 to 500.0

Details

The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.

Operating Temp Range

-55.0 to 75.0 deg celsius

Details

The minimum and maximum limits of temperature at which the item is rated for operation.

Reference Frequency Per Function

250.0 kilohertz blank

Details

The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.

Source Impedance Rating Per Function

20.0 kilohms blank

Details

The total opposition per function,presented by a source of energy to the input terminals of an item.

Load Impedance Per Function

20.0 kilohms blank

Details

The total opposition per function,presented by a load to the output terminals of an item.

Input Impedance Per Function W/Load

20.0 kilohms blank

Details

The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).

Output Impedance Per Function W/Source Across Input

20.0 kilohms blank

Details

The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).

Principal Circuitry Type Per Function

crystal blank

Details

Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.

Average Power Rating Per Function

0.002 watts blank

Details

The value of the average amount of electrical energy per function,which the item may pass or dissipate in continuous operation without degradation of physical or electrical characteristics.

Mounting Facility Screw Thread Series Designator

unc

Details

A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.

Inclosure Type

hermetically sealed

Details

Indicates the type of inclosure provided to coat,cover,protect,or encase the item.

Mounting Facility Type And Quantity

2 threaded stud

Details

Indicates the type and number of facilities by which the item is mounted.

Insertion Loss At Reference Frequency Per Function In Decibels

3.0 blank

Details

The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.

Functional Terminal Type And Quantity

2 tab, solder lug input 1st function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Functional Terminal Type And Quantity

2 tab, solder lug output 2nd function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Specified Frequencies Of Discrimination Per Function

248.90 kilohertz blank and 249.78 kilohertz blank and 250.22 kilohertz blank and 251.10 kilohertz blank

Details

The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.

Nominal Thread Size

0.112 inches

Details

A designation that is used for the purpose of general identification of the thread.

Body Material

metal

Details

The chemical compound or mechanical mixture properties of which the body is fabricated.

Frequency Band Width Per Function

249.78 kilohertz blank and 250.22 kilohertz blank

Details

The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.

Discrimination At Specified Frequencies Per Function In Decibels

60.0 nominal blank and 3.0 nominal blank 1st function

Details

The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.

Body Surface Treatment

nickel

Details

The metallic,nonmetallic,and/or chemical properties with which the body is plated,dipped and/or coated. the treatment is designed to protect the body surface/s/ and cannot be wiped off.

Style Designator

rectangular terminal/terminals on one surface

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
FIL-0811	22929	5	-	5	9	-	TX
293-0706-00	13499	1	-	5	9	-	TX
293-0706-000	13499	1	-	3	2	-	TX
293-0706-00	75378	5	-	5	2	-	TX
927	03040	5	-	5	2	-	TX
927	59559	5	-	5	9	-	TX
293-0706-00	82567	5	-	5	2	-	TX
FIL-0811	82567	5	-	5	2	-	TX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
P	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
58500	-	P	-

RVC	WCC	TCC	SHC
-	593	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

MICROSEMI CORP. - HIGH PERFORMANCE TIMING DBA MICROSEMI CORP - HIGH PERFORMANCE TIMING

CAGE: 00136

MOUNT HOLLY SPRINGS , PA , 17065-1821

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5915-00-849-8825

What is the NIIN of the NSN 5915-00-849-8825?

The National Item Identification Number (NIIN) of the NSN 5915-00-849-8825 is 00-849-8825

When the NSN 5915-00-849-8825 was assigned to the Federal Catalog?

It was assigned 63 years ago, on Mon, Jan 1, 1962

Does the NSN 5915-00-849-8825 contain any precious metals?

Type/content is unknown

Does the NSN 5915-00-849-8825 contain any hazardous material?

No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.