Band Pass Filter
293-0044-00
(NSN) National Stock Number
5915-00-953-5122
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00209
Schedule B Code
8527995030
Summary
2.375 inches nominal overall length, 0.812 inches nominal overall height, 1.875 inches maximum body length, 0.500 inches nominal body width, 0.812 inches nominal body height, 1.375 inches nominal distance between centerlines of mounting facilities parallel to body length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | TX |
Identification
An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes:a single inductance, or a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00209 | A047B0 | 3 | 1 |
Specifications
Overall Length
2.375 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Overall Height
0.812 inches nominal
Details
The distance measured in a straight line from the bottom to the top of an item.Body Length
1.875 inches maximum
Details
A measurement of the longest dimension of the body,in distinction from width.Body Width
0.500 inches nominal
Details
A measurement taken at right angles to the length of the body,in distinction from thickness.Body Height
0.812 inches nominal
Details
A measurement from the bottom to the top of the body,in distinction from depth.Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
1.375 inches nominal
Details
The distance between centerlines of mounting facilities parallel to the length of the item.Vibration Resistance Range In Hertz
+10.0 to 55.0
Details
The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.Operating Temp Range
-55.0 to 100.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Reference Frequency Per Function
20.550 megahertz blank
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Source Impedance Rating Per Function
2.0 kilohms blank
Details
The total opposition per function,presented by a source of energy to the input terminals of an item.Load Impedance Per Function
2.0 kilohms blank
Details
The total opposition per function,presented by a load to the output terminals of an item.Input Impedance Per Function W/Load
2.0 kilohms blank
Details
The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).Output Impedance Per Function W/Source Across Input
2.0 kilohms blank
Details
The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).Principal Circuitry Type Per Function
inductance-capacitance-resistance blank
Details
Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.Mounting Facility Screw Thread Series Designator
unc
Details
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.Inclosure Type
hermetically sealed
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
2 threaded hole
Details
Indicates the type and number of facilities by which the item is mounted.Insertion Loss At Reference Frequency Per Function In Decibels
50.0 blank
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Functional Terminal Type And Quantity
1 tab, solder lug input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 tab, solder lug output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Specified Frequencies Of Discrimination Per Function
20.450 megahertz blank and 20.650 megahertz blank and 20.525 megahertz blank and 20.575 megahertz blank
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Nominal Thread Size
0.086 inches
Details
A designation that is used for the purpose of general identification of the thread.Frequency Band Width Per Function
20.550 megahertz blank and 20.575 megahertz blank
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Discrimination At Specified Frequencies Per Function In Decibels
60.0 nominal blank and 6.0 nominal blank 1st function
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Maximum Dielectric Withstanding Dc Voltage
5.0 volts at sea level
Details
The maximum direct current voltage that the insulating material/s/ of the item will withstand without resulting in disruptive discharge or deterioration.Style Designator
rectangular terminal/terminals on two surfaces
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| RF1-303 | 30902 | 5 | - | C | 1 | - | ZZ |
| 2B5 | 00136 | 5 | - | 5 | 2 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58500 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
ROCKWELL COLLINS, INC. DBA COLLINS AEROSPACE GOVERNMENT SYSTEMS DIV COLLINS AEROSPACE - GOVERNMENT SYSTEMS
CAGE: 13499
CEDAR RAPIDS
, IA
, 52498-0505
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-953-5122
What is the NIIN of the NSN 5915-00-953-5122?
The National Item Identification Number (NIIN) of the NSN 5915-00-953-5122 is 00-953-5122
When the NSN 5915-00-953-5122 was assigned to the Federal Catalog?
It was assigned 63 years ago, on Mon, Jan 1, 1962
Does the NSN 5915-00-953-5122 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-953-5122 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products