High Pass Filter
TBA
(NSN) National Stock Number
5915-01-014-0335
Federal Supply Classification
5915 Filters and Networks
Item Name Code
13910
Schedule B Code
8527995030
Summary
7.624 inches maximum overall length, 1.016 inches maximum overall height, 7.000 inches maximum body length, 2.750 inches maximum body width, 4.000 inches nominal distance between centerlines of mounting facilities parallel to body length, 2.250 inches nominal distance between centerlines of mounting facilities parallel to body width
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | TX |
Identification
An item designed to pass all frequencies above a specified frequency. Excludes:a single inductance, a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13910 | A047B0 | 3 | 1 |
Specifications
Overall Length
7.624 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Overall Height
1.016 inches maximum
Details
The distance measured in a straight line from the bottom to the top of an item.Body Length
7.000 inches maximum
Details
A measurement of the longest dimension of the body,in distinction from width.Body Width
2.750 inches maximum
Details
A measurement taken at right angles to the length of the body,in distinction from thickness.Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
4.000 inches nominal
Details
The distance between centerlines of mounting facilities parallel to the length of the item.Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
2.250 inches nominal
Details
The distance between centerlines of mounting facilities parallel to the width of the item.Operating Temp Range
+0.0 to 60.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Reference Frequency Per Function
1.431 megahertz blank
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Input Impedance Per Function W/Load
75.0 ohms blank
Details
The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).Output Impedance Per Function W/Source Across Input
75.0 ohms blank
Details
The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).Mounting Facility Screw Thread Series Designator
unc
Details
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.Inclosure Type
hermetically sealed
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
4 threaded hole
Details
Indicates the type and number of facilities by which the item is mounted.Insertion Loss At Reference Frequency Per Function In Decibels
1.0 blank
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Functional Terminal Type And Quantity
1 pin input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 pin output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
2 pin ground 3rd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Specified Frequencies Of Discrimination Per Function
300.00 hertz blank and 8.00 kilohertz blank and 12.00 kilohertz blank and 2.85 megahertz blank
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Nominal Thread Size
0.138 inches
Details
A designation that is used for the purpose of general identification of the thread.Body Material
metal
Details
The chemical compound or mechanical mixture properties of which the body is fabricated.Frequency Band Width Per Function
12.00 kilohertz blank and 2.85 megahertz blank
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Discrimination At Specified Frequencies Per Function In Decibels
43.00 maximum blank and 1.0 maximum blank 1st function
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Body Surface Treatment
tin
Details
The metallic,nonmetallic,and/or chemical properties with which the body is plated,dipped and/or coated. the treatment is designed to protect the body surface/s/ and cannot be wiped off.Style Designator
rectangular terminal/terminals on opposite surfaces
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 5312 | 17857 | 5 | - | 5 | 9 | - | TX |
| KPN5312 | 17857 | 5 | - | 5 | 9 | - | TX |
| 673-0041-010 | 13499 | 1 | - | 3 | 9 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 21275 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 5915-01-014-0335
What is the NIIN of the NSN 5915-01-014-0335?
The National Item Identification Number (NIIN) of the NSN 5915-01-014-0335 is 01-014-0335
When the NSN 5915-01-014-0335 was assigned to the Federal Catalog?
It was assigned 49 years ago, on Sun, Dec 14, 1975
Does the NSN 5915-01-014-0335 contain any precious metals?
Type/content is unknown
Does the NSN 5915-01-014-0335 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products