Radio Frequency Interfere Filter

2420-001

2420-001
(NSN) National Stock Number
5915-01-025-7168
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00765
Schedule B Code
8527995030
Summary

1.711 inches nominal overall length, 0.860 inches nominal body length, 0.670 inches nominal body outside diameter, +10.0 to 2000.0 vibration resistance range in hertz, -55.0 to 125.0 deg celsius operating temp range, 50.0 ohms blank source impedance rating per function

DAC HCC DMIL RNCC
3 - - 5
RNVC SADC MSDS RNAAC
9 - - TX
Identification

An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes:items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes:filter, low pass and suppressor, ignition interference. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. See also limiter, electrical noise.

INC FIIG Concept Condition
00765 A047B0 3 1
Specifications
Overall Length
1.711 inches nominal
Details The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
Body Length
0.860 inches nominal
Details A measurement of the longest dimension of the body,in distinction from width.
Body Outside Diameter
0.670 inches nominal
Details The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
Vibration Resistance Range In Hertz
+10.0 to 2000.0
Details The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.
Operating Temp Range
-55.0 to 125.0 deg celsius
Details The minimum and maximum limits of temperature at which the item is rated for operation.
Source Impedance Rating Per Function
50.0 ohms blank
Details The total opposition per function,presented by a source of energy to the input terminals of an item.
Load Impedance Per Function
50.0 ohms blank
Details The total opposition per function,presented by a load to the output terminals of an item.
Power Line Frequency Rating Per Function In Hertz
400.0 blank
Details The cycles per second /hertz/ of the power line alternating current.
Operating Current Rating Per Function In Amps
0.1 blank
Details The level of electrical flow,per function,for which the item is designed to operate,expressed in ampers.
Mounting Facility Screw Thread Series Designator
unf
Details A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.
Inclosure Type
hermetically sealed
Details Indicates the type of inclosure provided to coat,cover,protect,or encase the item.
Mounting Facility Type And Quantity
1 threaded bushing
Details Indicates the type and number of facilities by which the item is mounted.
Functional Terminal Type And Quantity
1 tab, solder lug input 1st function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Functional Terminal Type And Quantity
1 tab, solder lug output 2nd function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Operating Voltage Rating And Type Per Function
230.0 volts ac blank and 400.0 volts dc blank
Details The level of electrical potential and type of current,per function,for which the item is designed.
Nominal Thread Size
0.312 inches
Details A designation that is used for the purpose of general identification of the thread.
Body Material
metal
Details The chemical compound or mechanical mixture properties of which the body is fabricated.
Maximum Dielectric Withstanding Dc Voltage
800.0 volts at sea level
Details The maximum direct current voltage that the insulating material/s/ of the item will withstand without resulting in disruptive discharge or deterioration.
Body Surface Treatment
gold
Details The metallic,nonmetallic,and/or chemical properties with which the body is plated,dipped and/or coated. the treatment is designed to protect the body surface/s/ and cannot be wiped off.
Style Designator
round terminal/terminals on opposite surfaces
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
247AS-C0797-003 30003 1 - 7 2 - TX
2420-001E 0LSP2 5 - 3 2 - ZZ
2420-001E 33095 3 - 5 9 - KE
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
P G - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
58500 - P -
RVC WCC TCC SHC
- 72D Z 9

What's Included?

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • Friendly service to back every order
Manufacturer
SPECTRUM CONTROL INC
CAGE: 33095
FAIRVIEW , PA , 16415-2829
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-01-025-7168
What is the NIIN of the NSN 5915-01-025-7168?
The National Item Identification Number (NIIN) of the NSN 5915-01-025-7168 is 01-025-7168
When the NSN 5915-01-025-7168 was assigned to the Federal Catalog?
It was assigned 48 years ago, on Sun, Aug 8, 1976
Does the NSN 5915-01-025-7168 contain any precious metals?
Contains gold
Does the NSN 5915-01-025-7168 contain any hazardous material?
No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

At Aerospace Shop, we are dedicated to providing high-quality aerospace components, shop supplies, replacement parts, and tools.

With a commitment to excellence and customer satisfaction, we aim to be your trusted partner in the aerospace industry.

Contact
800 Town and Country Blvd
Houston, TX, 77024
United States
© 2024 Aerospace Shop, Inc. All rights reserved.
Made in USA