Radio Frequency Interfere Filter

M15733/62-0004

(NSN) National Stock Number

5915-01-118-0388

Federal Supply Classification

5915 Filters and Networks

Item Name Code

00765

Schedule B Code

8527995030

Summary

1.092 inches maximum overall length, 0.279 inches maximum body length, +10.0 to 2000.0 vibration resistance range in hertz, -55.0 to 125.0 deg celsius operating temp range, 50.0 ohms blank source impedance rating per function, 50.0 ohms blank load impedance per function

DAC	HCC	DMIL	RNCC
3	-	-	2

RNVC	SADC	MSDS	RNAAC
2	-	-	TX

Identification

An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes:items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes:filter, low pass and suppressor, ignition interference. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. See also limiter, electrical noise.

INC	FIIG	Concept	Condition
00765	A047B0	3	1

Specifications

Overall Length

1.092 inches maximum

Details

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

Body Length

0.279 inches maximum

Details

A measurement of the longest dimension of the body,in distinction from width.

Vibration Resistance Range In Hertz

+10.0 to 2000.0

Details

The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.

Operating Temp Range

-55.0 to 125.0 deg celsius

Details

The minimum and maximum limits of temperature at which the item is rated for operation.

Source Impedance Rating Per Function

50.0 ohms blank

Details

The total opposition per function,presented by a source of energy to the input terminals of an item.

Load Impedance Per Function

50.0 ohms blank

Details

The total opposition per function,presented by a load to the output terminals of an item.

Operating Current Rating Per Function In Amps

10.0 blank

Details

The level of electrical flow,per function,for which the item is designed to operate,expressed in ampers.

Principal Circuitry Type Per Function

inductance-capacitance blank

Details

Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.

Maximum Temp Rise

15.0 deg celsius

Details

The maximum permissible temperature increase in the item as a result of its operation under normal conditions.

Inclosure Type

encased

Details

Indicates the type of inclosure provided to coat,cover,protect,or encase the item.

Width Across Flats

0.160 inches maximum

Details

The shortest straight line between flats,perpendicular to the height.

Mounting Facility Type And Quantity

2 terminal

Details

Indicates the type and number of facilities by which the item is mounted.

Functional Terminal Type And Quantity

1 pin input 1st function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Functional Terminal Type And Quantity

1 turret output 2nd function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Operating Voltage Rating And Type Per Function

70.0 volts dc blank

Details

The level of electrical potential and type of current,per function,for which the item is designed.

Body Material

metal

Details

The chemical compound or mechanical mixture properties of which the body is fabricated.

Maximum Dielectric Withstanding Dc Voltage

200.0 volts at sea level

Details

The maximum direct current voltage that the insulating material/s/ of the item will withstand without resulting in disruptive discharge or deterioration.

Unpackaged Unit Weight

0.700 grams nominal

Details

The measured weight of an item unencumered by packaging or packing material.

Style Designator

round terminal/terminals on opposite surfaces

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Test Data Document

81349-mil-f-15733 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).

Details

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

Specification/Standard Data

81349-mil-f-15733/62 government specification

Details

The document designator of the specification or standard which established the item of supply.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
51-750-309	0LSP2	4	-	5	2	-	9Z
FL47GW1ED3-0004	81349	3	-	5	9	-	TX
M15733/62-004	81349	3	-	C	1	-	ZZ
MIL-F-15733/62	81349	3	-	5	9	-	TX
MIL-PRF-15733/62	81349	E	-	4	1	-	ZZ

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
P	A	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
58500	-	P	-

RVC	WCC	TCC	SHC
-	72D	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

CAGE: 81349

View Products

FAQs

Frequently asked questions for NSN 5915-01-118-0388

What is the NIIN of the NSN 5915-01-118-0388?

The National Item Identification Number (NIIN) of the NSN 5915-01-118-0388 is 01-118-0388

When the NSN 5915-01-118-0388 was assigned to the Federal Catalog?

It was assigned 43 years ago, on Wed, Aug 26, 1981

Does the NSN 5915-01-118-0388 contain any precious metals?

Does not contain precious metal

Does the NSN 5915-01-118-0388 contain any hazardous material?

No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.