Band Pass Filter

2038

2038
(NSN) National Stock Number
5915-01-125-6303
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00209
Schedule B Code
8527995030
Summary

0.840 inches nominal overall height, 0.432 inches maximum body length, 0.185 inches maximum body width, 0.340 inches maximum body height, +10.0 to 500.0 vibration resistance range in hertz, -55.0 to 100.0 deg celsius operating temp range

DAC HCC DMIL RNCC
5 - - 5
RNVC SADC MSDS RNAAC
2 - - TX
Identification

An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes:a single inductance, or a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).

INC FIIG Concept Condition
00209 A047B0 3 1
Specifications
Overall Height
0.840 inches nominal
Details The distance measured in a straight line from the bottom to the top of an item.
Body Length
0.432 inches maximum
Details A measurement of the longest dimension of the body,in distinction from width.
Body Width
0.185 inches maximum
Details A measurement taken at right angles to the length of the body,in distinction from thickness.
Body Height
0.340 inches maximum
Details A measurement from the bottom to the top of the body,in distinction from depth.
Vibration Resistance Range In Hertz
+10.0 to 500.0
Details The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.
Operating Temp Range
-55.0 to 100.0 deg celsius
Details The minimum and maximum limits of temperature at which the item is rated for operation.
Reference Frequency Per Function
118.8 megahertz blank
Details The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.
Source Impedance Rating Per Function
3.0 kilohms blank
Details The total opposition per function,presented by a source of energy to the input terminals of an item.
Load Impedance Per Function
3.0 kilohms blank
Details The total opposition per function,presented by a load to the output terminals of an item.
Principal Circuitry Type Per Function
crystal blank
Details Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.
Inclosure Type
hermetically sealed
Details Indicates the type of inclosure provided to coat,cover,protect,or encase the item.
Mounting Facility Type And Quantity
3 terminal
Details Indicates the type and number of facilities by which the item is mounted.
Insertion Loss At Reference Frequency Per Function In Decibels
3.0 blank
Details The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.
Functional Terminal Type And Quantity
1 wire lead ground 3rd function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Functional Terminal Type And Quantity
1 wire lead input 1st function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Functional Terminal Type And Quantity
1 wire lead output 2nd function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Specified Frequencies Of Discrimination Per Function
118.73 megahertz blank and 118.79 megahertz blank and 118.81 megahertz blank and 118.94 megahertz blank
Details The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.
Body Material
metal
Details The chemical compound or mechanical mixture properties of which the body is fabricated.
Frequency Band Width Per Function
118.79 megahertz blank and 118.81 megahertz blank
Details The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.
Discrimination At Specified Frequencies Per Function In Decibels
30.0 minimum blank and 3.0 maximum blank 1st function
Details The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.
Style Designator
rectangular terminal/terminals on one surface
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
2798 25120 5 - 5 2 - TX
293-1315-010 13499 1 - 3 2 - TX
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
P A - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
58500 - P -
RVC WCC TCC SHC
- 593 Z 9
Price and Availability Quote

Send us a quick request for quote using the form below:

What's Included?

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • Friendly service to back every order
Manufacturer
MICROSEMI CORP. - HIGH PERFORMANCE TIMING DBA MICROSEMI CORP - HIGH PERFORMANCE TIMING
CAGE: 00136
MOUNT HOLLY SPRINGS , PA , 17065-1821
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-01-125-6303
What is the NIIN of the NSN 5915-01-125-6303?
The National Item Identification Number (NIIN) of the NSN 5915-01-125-6303 is 01-125-6303
When the NSN 5915-01-125-6303 was assigned to the Federal Catalog?
It was assigned 42 years ago, on Sat, Jan 30, 1982
Does the NSN 5915-01-125-6303 contain any precious metals?
Does not contain precious metal
Does the NSN 5915-01-125-6303 contain any hazardous material?
No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

At Aerospace Shop, we are dedicated to providing high-quality aerospace components, shop supplies, replacement parts, and tools.

With a commitment to excellence and customer satisfaction, we aim to be your trusted partner in the aerospace industry.

Contact
800 Town and Country Blvd
Houston, TX, 77024
United States
© 2025 Aerospace Shop, Inc. All rights reserved.
Made in USA